Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: Fairing Board
By:John Abercrombie
Date: 4/16/2012, 8:29 pm
In Response To: Strip: Fairing Board (danperry)

: Sanding time and ready to make a fairing board. The board doesn't
: seem to be all that complicated unless I want something with a
: vacuum attachment, I can handle that part. My question is what
: kind of sandpaper do you use and where do you get it? I saw some
: with a stickie back today, a 4.5" wide roll, but it was 320
: and 180 grit.

: Thanks much

Narrower-
http://www.leevalley.com/US/wood/page.aspx?p=20179&cat=1,42500

Autobody supply places might be another place to try; they will certainly have the non-adhesive (17"?) strips to fit autobody boards.

Messages In This Thread

Strip: Fairing Board
danperry -- 4/16/2012, 7:10 pm
Re: Strip: Fairing Board
John Abercrombie -- 4/16/2012, 8:29 pm
Re: Strip: Fairing Board
danperry -- 4/16/2012, 9:03 pm
Re: Strip: Fairing Board
Mike -- 4/16/2012, 9:59 pm
Re: Strip: Fairing Board
danperry -- 4/16/2012, 10:30 pm
Re: Strip: Fairing Board
John Abercrombie -- 4/16/2012, 11:05 pm
Re: Strip: Fairing Board
dave g -- 4/17/2012, 12:08 am
Re: Strip: Fairing Board
Bill Hamm -- 4/17/2012, 1:38 am
Re: Strip: Fairing Board
Sean Dawe -- 4/17/2012, 8:33 am
Re: Strip: Fairing Board
ancient kayaker -- 4/17/2012, 4:20 pm
Re: Strip: Fairing Board
Bill Hamm -- 4/18/2012, 1:39 am
Re: Strip: Fairing Board
Bill Hamm -- 4/17/2012, 1:36 am
Agree
Jay Babina -- 4/17/2012, 6:58 am
Re: Agree *PIC*
Sean Dawe -- 4/17/2012, 9:01 am
Re: Agree
Bill Hamm -- 4/18/2012, 1:43 am
What I use - Link
Jay Babina -- 4/18/2012, 7:19 am
Re: What I use - Link
Bill Hamm -- 4/22/2012, 2:07 am
Re: Strip: Fairing Board
Brian Nystrom -- 4/17/2012, 6:28 am
Re: Strip: Fairing Board
Will N To Go -- 4/17/2012, 7:30 pm
Re: Strip: Fairing Board
Bill Hamm -- 4/18/2012, 1:47 am
Re: Strip: Fairing Board
Bill Hamm -- 4/18/2012, 1:49 am
Re: Strip: Fairing Board *PIC*
Etienne Muller -- 4/18/2012, 4:23 am
Re: Strip: Fairing Board *PIC*
Etienne Muller -- 4/18/2012, 4:25 am
Re: Strip: Fairing Board
Mike Bielski -- 4/18/2012, 8:43 am
Re: Strip: Fairing Board
danperry -- 4/18/2012, 9:29 am
Re: Strip: Fairing Board
Dave Houser -- 4/18/2012, 4:05 pm
Re: Strip: Fairing Board
Randy Echtinaw -- 4/18/2012, 4:12 pm
Re: Strip: Fairing Board
Mike -- 4/18/2012, 5:15 pm