Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Skin-on-Frame: Design choice
By:Clayton Plunkett
Date: 4/6/2012, 1:09 pm
In Response To: Skin-on-Frame: Design choice (lance buck)

: I'm looking to make at least 6 boats for my kids & their teen
: group.
: It has to be super simple to build and 'mass-produce'.
: I built a Yost Kidarka for my daughter, but she can't get in there
: anymore.
: Rarely, more than an overnight trip. Mostly flat water and easy
: river paddling.
: The kids love paddling all over the place in my bigger boats, but I
: want something they can start learning to roll in, and paddle on
: into early adult.
: After hours on the Yost site, I'm leaning toward Sea Otter-R.
: Am I on the right track? Any thoughts?
: Lance

Hi Lance,
You may want to consider a single chine hull. That is much easer to "mass-produce" than the multi chine hull. If the paddler is young then 19" to 21" beam should work fine for easy water paddling. That makes a better rolling kayak as well. I would suggest the Sea Rider or the Roldarka and I also like the Disko Bay that Dave Gentry has on his web site.
http://www.gentrycustomboats.com/Home.html
Good luck choosing and have fun building.
Clayton Plunkett

Messages In This Thread

Skin-on-Frame: Design choice
lance buck -- 4/6/2012, 11:04 am
Re: Skin-on-Frame: Design choice
George in Va -- 4/6/2012, 11:40 am
Re: Skin-on-Frame: Design choice
Dave Gentry -- 4/6/2012, 12:58 pm
Re: Skin-on-Frame: Design choice
Clayton Plunkett -- 4/6/2012, 1:09 pm
Re: Skin-on-Frame: Design choice
Foster -- 4/9/2012, 10:27 am