Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Other: LED in the Glass
By:Jim Looker
Date: 3/19/2012, 9:37 am

Has anyone tried installing 'running light' LED's in the epoxy? A friend of mine is working through this but hasn't finished yet and I was thinking to try something similar. I looking to put a red/green pair in the front of the kayak and a pair or whites in the back, under the glass, in holes drilled in the wood. They'd be controlled from the cockpit area.

Burn time on these is up around 10,000 hours now so we'd never need to replace the LED's I expect.

Any experience out there with this type of project?

Thanks,

Jim

Messages In This Thread

Other: LED in the Glass
Jim Looker -- 3/19/2012, 9:37 am
Re: Other: LED in the Glass
Malcolm Schweizer -- 3/19/2012, 10:36 am
Re: Other: LED in the Glass
Jim Looker -- 3/19/2012, 1:00 pm
Re: Other: LED in the Glass
Etienne Muller -- 3/19/2012, 11:31 am
Re: Other: LED in the Glass
Malcolm Schweizer -- 3/19/2012, 10:27 pm
Re: Other: LED in the Glass
Etienne Muller -- 3/20/2012, 8:20 am
Re: Other: LED in the Glass
Malcolm Schweizer -- 3/20/2012, 12:47 pm
Re: Other: LED in the Glass
DSmith -- 3/20/2012, 4:51 pm
Re: Other: LED in the Glass
Kirk Fredericks -- 3/20/2012, 2:03 pm
Re: Other: LED in the Glass
Bill Hamm -- 3/21/2012, 3:24 am
Re: Other: LED in the Glass
ancient kayaker -- 3/23/2012, 3:56 pm
Re: Other: LED in the Glass
Nick Schade - Guillemot Kayaks -- 3/19/2012, 1:38 pm
Re: Other: LED in the Glass
Bill Hamm -- 3/20/2012, 2:03 am
Re: Other: LED in the Glass
DSmith -- 3/20/2012, 4:54 pm
Re: Other: LED in the Glass
Bill Hamm -- 3/21/2012, 3:26 am
Re: Other: LED in the Glass
Sean Dawe -- 3/20/2012, 2:36 pm