Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Skin-on-Frame: First time builder
By:Matthias
Date: 1/24/2012, 2:21 am
In Response To: Re: Skin-on-Frame: First time builder (ancient kayaker)

: You can follow his system if you wish. I would prefer to have
: several station forms to control the hull shape, to which I
: would attach the longitudinal members including the stringers,
: creating an accurate five-point guide for shaping the ribs,
: which would be lashed while they are still soft and pliable.
: Since the stringers are fairly robust and the ribs are thin you
: shouldn’t need a lot of station forms to support the stringers
: during ribbing. If you install the ribs closest to the station
: forms first and work toward the unsupported span of the
: stringers, the earlier ribs will provide additional support to
: the stringers. If you use this approach, make sure you extract
: the station forms before the ribs make it difficult!

This could work... but to be honest, I think you're over complicating it.

Bending the ribs is really not hard, and while some attach the keel first to get the right depth all the way, adding the stringers as well would make everything quite a bit harder I think.

Also, once you're done bending you would have to take keel and stringers off again to get the ribs into the mortices.

Messages In This Thread

Skin-on-Frame: First time builder
stefalo -- 1/22/2012, 1:06 am
Re: Skin-on-Frame: First time builder
Bill Hamm -- 1/22/2012, 3:07 am
Re: Skin-on-Frame: First time builder
Bill Hamm -- 1/22/2012, 3:08 am
Re: Skin-on-Frame: First time builder
stefalo -- 1/22/2012, 3:16 am
Re: Skin-on-Frame: First time builder
Bill Hamm -- 1/22/2012, 4:10 am
Re: Skin-on-Frame: First time builder
Ken Blanton -- 1/22/2012, 6:04 am
Re: Skin-on-Frame: First time builder
Matthias -- 1/22/2012, 7:14 am
Re: Skin-on-Frame: First time builder
Dave Gentry -- 1/22/2012, 7:54 am
Re: Skin-on-Frame: First time builder
Paul Montgomery -- 1/22/2012, 9:37 am
Re: Skin-on-Frame: First time builder
Brian Nystrom -- 1/22/2012, 12:55 pm
Re: Skin-on-Frame: First time builder
Paul Montgomery -- 1/22/2012, 8:02 pm
Re: Skin-on-Frame: First time builder
Ken Blanton -- 1/22/2012, 5:51 pm
Re: Skin-on-Frame: First time builder
Paul Montgomery -- 1/22/2012, 8:06 pm
About the glue laming..
David Bynoe -- 1/22/2012, 7:08 pm
Re: About the glue laming..
Jeff Soper -- 2/5/2012, 1:13 am
Re: About the glue laming..
stefalo -- 2/8/2012, 11:09 pm
Re: About the glue laming..
Mike Savage -- 2/9/2012, 4:00 am
Re: About the glue laming..
stefalo -- 2/9/2012, 12:18 am
Re: About the glue laming..
Jeff Soper -- 2/14/2012, 5:27 pm
Re: About the glue laming..
Bill Hamm -- 2/15/2012, 2:03 am
Re: About the glue laming..
Jeff Soper -- 2/20/2012, 9:50 pm
Re: About the glue laming..
Bill Hamm -- 2/26/2012, 3:47 am
Re: About the glue laming..
ancient kayaker -- 2/9/2012, 10:55 am
Re: About the glue laming..
Mike Savage -- 2/9/2012, 2:23 pm
Re: About the glue laming..
John Abercrombie -- 2/9/2012, 3:51 pm
Re: About the glue laming..
ancient kayaker -- 2/9/2012, 10:12 pm
Re: About the glue laming..
Mike Savage -- 2/10/2012, 6:04 am
Re: Skin-on-Frame: First time builder *PIC*
ancient kayaker -- 1/22/2012, 11:32 pm
Re: Skin-on-Frame: First time builder
Bill Hamm -- 1/23/2012, 2:06 am
Re: Skin-on-Frame: First time builder
Kent LeBoutillier -- 1/23/2012, 11:57 am
Re: Skin-on-Frame: First time builder
stefalo -- 1/23/2012, 5:39 pm
Re: Skin-on-Frame: First time builder
Ken Blanton -- 1/23/2012, 9:58 pm
Re: Skin-on-Frame: First time builder
Bill Hamm -- 1/24/2012, 2:35 am
Re: Skin-on-Frame: First time builder
ancient kayaker -- 1/24/2012, 12:21 am
Re: Skin-on-Frame: First time builder
Matthias -- 1/24/2012, 2:21 am
Re: Skin-on-Frame: First time builder
ancient kayaker -- 1/25/2012, 12:55 am
Re: Skin-on-Frame: First time builder
stefalo -- 1/25/2012, 6:07 pm
Re: Skin-on-Frame: First time builder
ancient kayaker -- 1/25/2012, 10:28 pm
Re: Skin-on-Frame: First time builder
Ken Blanton -- 1/24/2012, 4:58 pm