Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Material: coaming rings
By:george jung
Date: 12/27/2011, 6:53 pm
In Response To: Re: Material: coaming rings *PIC* (Bob Beaullieu)

: . So I built

: George,

: I am finishing up a Spring Run over the holidays and I used Africa
: Mahogany for the coaming ring next to dark WRC on the riser and
: deck. Although the mahogany is slightly lighter, I like the way
: it looks next to the dark WRC. Not much contrast but the
: mahogany looks much "richer". I've attached a pic that
: was after glassing but before varnish....

: Bob Beaullieu

That looks good.

Our water is 'pretty hard' right now, so I'm in no rush.
Maybe I'll get some of these other woods, and offer myself options.
Making my rim a bit wider may help, as well.
On the bright side, I am getting more adept at heating/bending the strips!

Messages In This Thread

Material: coaming rings
george jung -- 12/26/2011, 5:02 pm
Re: Material: coaming rings
Brian Nystrom -- 12/27/2011, 6:21 am
Re: Material: coaming rings *PIC*
Bob Beaullieu -- 12/27/2011, 5:38 pm
Re: Material: coaming rings
george jung -- 12/27/2011, 6:53 pm
Re: Material: coaming rings
jwuts -- 12/27/2011, 8:38 pm
Re: Material: coaming rings
Brian Nystrom -- 12/29/2011, 6:29 am