Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: inner stem placement
By:Todd Olson
Date: 12/13/2011, 6:06 pm
In Response To: Re: Strip: inner stem placement (Douglas Lee)

: Hi Allen,

: The tape holding the 5/8" strips against the stem won't hold
: for me to taper the inner stem. Should I use some fine nails on
: the center of the inner stem to hold it in place?

Another option would be to use a solid piece of wood for the inner stem. I used a piece of pine, cut it to match the stem form, beveled the edge, and then just cut off the bevel and taped onto the stem form.

Messages In This Thread

Strip: inner stem placement
Douglas Lee -- 12/13/2011, 2:36 pm
Re: Strip: inner stem placement
Allan -- 12/13/2011, 2:50 pm
Re: Strip: inner stem placement
Douglas Lee -- 12/13/2011, 5:57 pm
Re: Strip: inner stem placement
Todd Olson -- 12/13/2011, 6:06 pm
Re: Strip: inner stem placement
Douglas Lee -- 12/13/2011, 6:29 pm
Re: Strip: inner stem placement
Bill Hamm -- 12/14/2011, 2:18 am
Re: Strip: inner stem placement
Douglas Lee -- 12/14/2011, 11:28 am
Re: Strip: inner stem placement
Don T -- 12/14/2011, 1:25 pm
Re: Strip: inner stem placement
ancient kayaker -- 12/14/2011, 3:43 pm
Re: Strip: inner stem placement
Bill Hamm -- 12/15/2011, 2:37 am
Re: Strip: inner stem placement
les cheeseman -- 12/15/2011, 10:52 am
Re: Strip: inner stem placement
Bill Hamm -- 12/15/2011, 2:34 am
Re: Strip: inner stem placement
Bryan Hansel -- 12/13/2011, 6:12 pm
Re: Strip: inner stem placement
Dan Caouette (CSFW) -- 12/13/2011, 6:24 pm
Re: Strip: inner stem placement
Douglas Lee -- 12/13/2011, 6:33 pm
Re: Strip: inner stem placement
Ian Cummins -- 12/13/2011, 6:37 pm
Re: Strip: inner stem placement
Douglas Lee -- 12/13/2011, 7:59 pm
Re: Strip: inner stem placement
Douglas Lee -- 12/14/2011, 5:58 pm