Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Epoxy: Wood Seal Coat (thinned)
By:Rob Macks/Laughing Loon CC&K
Date: 12/2/2011, 10:55 pm
In Response To: Re: Epoxy: Wood Seal Coat (thinned) (Bill Mayberry)

So, does anyone care enough about weight in a kayak,

: Thanks,
: Bill

Oh, and yes, I care very much about weight in a kayak.

That's why I started building with 3/16" strips 25 years ago
when everyone else used 1/4".

That's why I don't use internal/external stems or a shear clamp.

That's why I've used 4oz S-glass for ten years.

And why I'm working on a new 15-1/2' baidarka design that will weigh
under 30 pounds.

I carried a heavy canoe for many years on wilderness trips in northern Ontario
portaging from lake to lake. I have strong memories of slippery rock hopping in the rain
with black flies biting everywhere. That sure planted the seed for dreams of owning a light-weight
canoe.

But most of all I remember the time a friend let me borrow his light-weight glass whitewater
canoe. I was used to paddling the ubiquitous heavy ABS canoes used for whitewater.

I could not believe how easy it was to paddle that boat. I could paddle upstream hopping from eddy
to eddy. I felt like I could fly in the boat. And ever since I've been obsessed with keeping my canoes
and kayaks as light-weight and strong as possible.

A light-weight kayak is so easy to paddle and maneuver. It's my top priority.

That's probably why I've never felt the need for a skeg.

Rob

I take myself lightly.

Messages In This Thread

Epoxy: Wood Seal Coat before glassing....
Bob Beaullieu -- 12/2/2011, 12:20 pm
Re: Epoxy: Wood Seal Coat before glassing....
Rob Macks/Laughing Loon CC&K -- 12/2/2011, 12:50 pm
Re: Epoxy: Wood Seal Coat before glassing....
Bob Beaullieu -- 12/2/2011, 1:01 pm
Re: Epoxy: Wood Seal Coat (thinned)
Bill Mayberry -- 12/2/2011, 6:32 pm
Re: Epoxy: Wood Seal Coat (thinned)
Rob Macks/Laughing Loon CC&K -- 12/2/2011, 10:31 pm
Re: Epoxy: Wood Seal Coat (thinned)
Rob Macks/Laughing Loon CC&K -- 12/2/2011, 10:55 pm
Re: Epoxy: Wood Seal Coat (thinned)
Bill Mayberry -- 12/2/2011, 11:25 pm
Re: Epoxy: Wood Seal Coat (thinned)
Brian Nystrom -- 12/3/2011, 11:28 am
Re: Epoxy: Wood Seal Coat before glassing....
Dan Gallagher -- 12/3/2011, 1:36 pm
Re: Epoxy: Wood Seal Coat before glassing....
Etienne Muller -- 12/3/2011, 2:13 pm
Re: Epoxy: Wood Seal Coat before glassing....
Bill Mayberry -- 12/3/2011, 2:42 pm
Re: Epoxy: Wood Seal Coat before glassing.... *PIC*
Etienne Muller -- 12/3/2011, 3:33 pm
Re: Epoxy: Wood Seal Coat before glassing....
Rob Macks------WebKitFormBoundarykHZ7kG4ZI7WSw+7N- -- 12/3/2011, 3:42 pm
Re: Epoxy: Wood Seal Coat before glassing....
Dan Gallagher -- 12/3/2011, 4:19 pm
Re: Epoxy: Wood Seal Coat before glassing....
Etienne Muller -- 12/4/2011, 4:39 am
Re: Epoxy: Wood Seal Coat before glassing....
Jay Babina -- 12/5/2011, 9:15 am
Re: Epoxy: Wood Seal Coat before glassing....
Robert N Pruden -- 12/5/2011, 12:11 pm
Re: Epoxy: Wood Seal Coat before glassing....
Bob Beaullieu -- 12/5/2011, 1:30 pm
Re: Epoxy: Wood Seal Coat before glassing....
Bill Hamm -- 12/6/2011, 2:43 am