Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: Carbon Fiber on the Inside
By:Bryan Hansel
Date: 12/1/2011, 2:03 pm
In Response To: Re: Strip: Carbon Fiber on the Inside (Mike Savage)

It was a crazy bad wind storm with winds much stronger than we normally get. The damage isn't all that big of a deal. It's probably 1/2 day of work to fix. I don't think I'd use carbon fiber again in a wood boat in this way again. I gotta believe that I've taken worse when paddling and come out okay. I feel for anyone that's using carbon fiber on the inside of their kayaks and I've seen it in a few builds in the last year.

: CF is very strong in tension but weak in compression along the
: fibre, when the canoe hit the tree, the CF was put under high
: compression loads and failed. There's also an imbalance in
: 'strength' if the CF is only on one side, the glass stretches a
: bit more than CF letting the outside stretch and putting the CF
: in compression. CF on the outside as well might have stabilised
: the 'strengths' and not failed. Though smacking into a tree
: never does a canoe any good.

Messages In This Thread

Strip: Carbon Fiber on the Inside
Bryan Hansel -- 11/30/2011, 9:57 am
Re: Strip: Carbon Fiber on the Inside
Charlie -- 11/30/2011, 10:51 am
Re: Strip: Carbon Fiber on the Inside
Malcolm Schweizer -- 11/30/2011, 1:23 pm
Re: Strip: Carbon Fiber on the Inside
Bryan Hansel -- 11/30/2011, 3:37 pm
Re: Strip: Carbon Fiber on the Inside
StephenHJ -- 11/30/2011, 1:37 pm
Re: Strip: Carbon Fiber on the Inside
Bryan Hansel -- 11/30/2011, 3:38 pm
Re: Strip: Carbon Fiber on the Inside
ScottBaxter -- 11/30/2011, 7:22 pm
Re: Strip: Carbon Fiber on the Inside
ancient kayaker -- 11/30/2011, 11:22 pm
Re: Strip: Carbon Fiber on the Inside
Bryan Hansel -- 12/1/2011, 1:59 pm
Re: Strip: Carbon Fiber on the Inside
Brian Nystrom -- 12/1/2011, 6:30 am
Re: Strip: Carbon Fiber on the Inside
Mike Savage -- 12/1/2011, 1:57 pm
Re: Strip: Carbon Fiber on the Inside
Bryan Hansel -- 12/1/2011, 2:03 pm
Re: Strip: Carbon Fiber on the Inside
Allan -- 12/1/2011, 4:51 pm
Re: Strip: Carbon Fiber on the Inside
Bryan Hansel -- 12/1/2011, 5:28 pm
Re: Strip: Carbon Fiber on the Inside
Robert N Pruden -- 12/1/2011, 6:55 pm
Re: Strip: Carbon Fiber on the Inside
Etienne Muller -- 12/2/2011, 3:21 am
Re: Strip: Carbon Fiber on the Inside
Kirk Briggs -- 12/3/2011, 9:44 am
Re: Strip: Carbon Fiber on the Inside
Paul G. Jacobson -- 12/9/2011, 2:30 pm