Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: Making station molds
By:douglas Lee
Date: 11/30/2011, 2:40 pm
In Response To: Re: Strip: Making station molds (skrap1r0n)

: I have no experience with what you are encountering, I purchased
: the full sized plans for my first project, but might I suggest
: perhaps photocopying the half on some clear acetate and then
: cutting out the edge so you can use it as a template? The clear
: acetate will make it easier to line up after you flip it.

That may work also. I will attempt drawing-out the measurement full size on large poster board paper. Then I won't have to flip a half mold.
Thanks,
Douglas

Messages In This Thread

Strip: Making station molds
douglas Lee -- 11/30/2011, 2:11 pm
Re: Strip: Making station molds
skrap1r0n -- 11/30/2011, 2:21 pm
Re: Strip: Making station molds
StephenHJ -- 11/30/2011, 2:37 pm
Re: Strip: Making station molds
douglas Lee -- 11/30/2011, 2:47 pm
Re: Strip: Making station molds
douglas Lee -- 11/30/2011, 2:40 pm
Re: Strip: Making station molds
george jung -- 11/30/2011, 11:18 pm