Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: Cove & Bead vs Bevel Edge
By:Paul Davies
Date: 11/7/2011, 3:26 pm
In Response To: Re: Strip: Cove & Bead vs Bevel Edge *PIC* (Etienne Muller)

: I think you made the right decision. The way I look at it is that
: it is a handmade artefact. So why not, as far as reasonably
: possible, use hand tools.

: This does not apply to ROS. Hand sanding, noooooo.

: Get one of these to keep in your pocket. It is so useful you may
: not use a larger plane.

: Et
Hi ET,
I find that, with hand sanding, the weight you loose through persperation can offset the enevitable extra accumulation of mass,through "extras" on the boat.I have an ROS ,however, I really enjoy the fairing process using a fairing board.I loose 2-3 kg over a boat build's duration.I seem to just put this mass on the boat instead.
I guess it's about lugging the boat to the water in which case "less" body weight is not sensed.
cheers from Paul NZ.

Messages In This Thread

Strip: Cove & Bead vs Bevel Edge
Thom Foster -- 11/5/2011, 1:59 pm
Re: Strip: Cove & Bead vs Bevel Edge
Mike Bielski -- 11/5/2011, 2:49 pm
Re: Strip: Cove & Bead vs Bevel Edge
Will N to Go -- 11/5/2011, 3:17 pm
Re: Strip: Cove & Bead vs Bevel Edge
Mike Bielski -- 11/6/2011, 12:31 am
Re: Strip: Cove & Bead vs Bevel Edge
Allan -- 11/5/2011, 4:06 pm
Re: Strip: Cove & Bead vs Bevel Edge
ancient kayaker -- 11/5/2011, 4:35 pm
Re: Strip: Cove & Bead vs Bevel Edge *PIC*
Andrew T -- 11/5/2011, 5:01 pm
Re: Strip: Cove & Bead vs Bevel Edge *PIC*
Don T -- 11/5/2011, 9:30 pm
Re: Strip: Cove & Bead vs Bevel Edge
Bill Hamm -- 11/6/2011, 1:52 am
Re: Strip: Cove & Bead vs Bevel Edge
Kirk Fredericks -- 11/6/2011, 8:16 am
Re: Strip: Cove & Bead vs Bevel Edge
ancient kayaker -- 11/5/2011, 10:52 pm
Re: Strip: Cove & Bead vs Bevel Edge
Thom Foster -- 11/5/2011, 10:08 pm
Re: Strip: Cove & Bead vs Bevel Edge *PIC*
Etienne Muller -- 11/6/2011, 3:46 am
Re: Strip: Cove & Bead vs Bevel Edge
Bill Hamm -- 11/7/2011, 2:08 am
Re: Strip: Cove & Bead vs Bevel Edge
Paul Davies -- 11/7/2011, 3:26 pm
Re: Strip: Cove & Bead vs Bevel Edge
JohnK -- 11/6/2011, 3:47 am
Re: Strip: Cove & Bead vs Bevel Edge
Bill Hamm -- 11/7/2011, 2:11 am
Re: Strip: Cove & Bead vs Bevel Edge
Rob Macks / Laughing Loon CC&K -- 11/6/2011, 8:57 am
Re: Strip: Cove & Bead vs Bevel Edge
Bill VerSteeg -- 11/6/2011, 12:58 pm