Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Tools: Circular hole cutter
By:Mike Bielski
Date: 11/3/2011, 1:49 pm
In Response To: Re: Tools: Circular hole cutter (Jay Babina )

: that blade can be found at hobbie shops or art stores and some wood
: working places. It's a standard X-acto blade.

I made a marking gauge with a kebiki knife. If I were going to make a circle cutter like this I would use a kebiki, not a disposable blade. They're not too expensive and they are AWESOME. http://www.japanwoodworker.com/product.asp?s=JapanWoodworker&pf_id=15%2E261%2E06&dept_id=12996

m

Messages In This Thread

Tools: Circular hole cutter *PIC*
Etienne Muller -- 11/2/2011, 4:45 pm
Re: Tools: Circular hole cutter *NM* *PIC*
Etienne Muller -- 11/2/2011, 4:46 pm
Re: Tools: Circular hole cutter *NM* *PIC*
Etienne Muller -- 11/2/2011, 4:48 pm
Re: Tools: Circular hole cutter *NM* *PIC*
Etienne Muller -- 11/2/2011, 4:48 pm
Re: Tools: Circular hole cutter
ancient kayaker -- 11/2/2011, 6:34 pm
Re: Tools: Circular hole cutter *PIC*
Etienne Muller -- 11/2/2011, 6:52 pm
Re: Tools: Circular hole cutter *PIC*
Etienne Muller -- 11/2/2011, 6:54 pm
Re: Tools: Circular hole cutter
Jay Babina -- 11/3/2011, 8:28 am
Re: Tools: Circular hole cutter
Etienne Muller -- 11/3/2011, 8:50 am
Re: Tools: Circular hole cutter
PAUL DAVIES -- 11/3/2011, 1:34 pm
Re: Tools: Circular hole cutter
Jay Babina -- 11/3/2011, 5:37 pm
Re: Tools: Circular hole cutter
Etienne Muller -- 11/3/2011, 7:45 pm
Re: Tools: Circular hole cutter
Mike Bielski -- 11/3/2011, 9:10 pm
Re: Tools: Circular hole cutter
Mike Bielski -- 11/3/2011, 1:49 pm