Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: Installing forward bulkhead without a h

: I'd also test it on a scrap of ply to make sure it doesn't
: "de-bond" the face veneer.

: When installing a bulkhead I would think the cleanest way would be
: to mark where it is to go first, apply adhesive to the inside of
: the boat, then insert the bulkhead, but I haven't tried it . . .

I'd suspect the bulkhead would get stuck on the adhesive when it's almost in place, average :)

Bill H.