I'll stick with the deck curve then.

: Been meaning to mention, also, that, if practical with your
: software, it would be best to also provide a table of numbers,
: as with Yost's designs.

I use DelftShip. Unfortunately, I can't get the offsets out of it in a usable format for this. I thought about drawing the plans to include the cutouts and curves and stringer notches. I actually have one almost done for a 15-foot boat that I'd like to build myself. Can you email me your spreadsheet so I can look at the format? I can measure it out in my CAD program when I get the time and post that.

: BTW, your stem diagrams took over right at the frames. There's
: really no need to make the the front stem, for example, 4 inches
: longer, since the keelson stub can just be extended 4 more
: inches (and its length is already a judgement call). But, note
: that a builder might be confused if using the old stem pattern
: with the new frame positions.

I'll probably redo the stem patterns as well. It's not difficult, because DelftShip spits out the drawings. I just need to move them around in a CAD program.

Thanks for all the feedback.