Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Skin-on-Frame: sewing dilemma
By:Peter B
Date: 7/14/2011, 3:25 pm
In Response To: Skin-on-Frame: sewing dilemma (Ronnie Ash)

That is probably due to the angle of the stem and stern being to steep. i had the same issue with my kayaks and i used skinboats instructions as a guide. I sewed a pocket in the stem and stern and this alleviated the problem you are describing. I would check out Skinboats.com they have videos that show how to do it as well.

Peter

: G'Day All!

: I'm building one of Dave Gentry's Chuckanut 12's. The frame is
: finished, and I'm now working on the fabric (8 0z polyester).
: Dave recommends covering the hull and deck separately, stapling
: the fabric to the gunwales, but I like the looks of those rolled
: and whip stitched seams running down the deck centerline so much
: that I decided sew it on in one piece, instead. Following Jeff
: Horton's procedure in his Kudzucraft video, I started in the
: center and worked toward the ends. From the bow to the aftermost
: frame, everything is fine, but from the last frame to the stern,
: I've got so much extra fabric on deck that it looks like it's
: pleated.

: I'm about ready to admit defeat, staple the hull fabric to the
: gunwales, and order enough more fabric to do the deck
: separately. Such a solution sure runs counter to my cheapskate
: philosophy though. Can y'all help me salvage the situation?

: Thanks, Ronnie

Messages In This Thread

Skin-on-Frame: sewing dilemma
Ronnie Ash -- 7/14/2011, 1:03 pm
Re: Skin-on-Frame: sewing dilemma
Wayne One (wwfloyd) -- 7/14/2011, 1:24 pm
Re: Skin-on-Frame: sewing dilemma
lance buck -- 7/14/2011, 1:47 pm
Re: Skin-on-Frame: sewing dilemma
StephenHJ -- 7/14/2011, 2:52 pm
Re: Skin-on-Frame: sewing dilemma
Peter B -- 7/14/2011, 3:25 pm
Re: Skin-on-Frame: sewing dilemma
Dave Gentry -- 7/14/2011, 3:55 pm
Re: Skin-on-Frame: sewing dilemma
john raley -- 7/14/2011, 6:04 pm
Re: Skin-on-Frame: sewing dilemma
Ronnie Ash -- 7/14/2011, 7:34 pm
Re: Skin-on-Frame: sewing dilemma
Jeff Horton -- 7/15/2011, 7:14 am