Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Off Topic: Bulkhead for existing kayak
By:ancient kayaker
Date: 7/7/2011, 2:14 pm

: Hi
: I recently purchased a kayak but it has only one bulkhead and
: wanted to install a fwd bulkhead. In order to get a sizing for
: the bulkhead I marked the outside of the hull at the place where
: the bulkhead was to go with 1" intervals and using a spirit
: level measured from the level to the hull at the intervals.
: Results of the plot were poor so thought I'd see if anybody had
: good way of going about this!
: Many thanks
: Pat

Here are some ideas you might try:

Hardware stores sell things for taking a pattern from a molding, usually used for cutting floor tiles to shape I believe, it looks like a bunch of short wires in a frame.

Another idea is to use a laser level, the type that projects a line; shine it at the side of the boat and then take a photo looking at the bow along the centerline. If you include a scale in the picture you should be able to print it full size.

Cut a rough outline in ply and use Plaster of Paris or drywall compound to fill in the gap and "correct" the shape.

Be aware that the 2 sides of the hull may not be exactly identical.

Messages In This Thread

Off Topic: Bulkhead for existing kayak
Pat -- 7/7/2011, 1:00 pm
Re: Off Topic: Bulkhead for existing kayak
ancient kayaker -- 7/7/2011, 2:14 pm
Re: Off Topic: Bulkhead for existing kayak
StephenHJ -- 7/7/2011, 2:42 pm
Re: Off Topic: Bulkhead for existing kayak
David Bynoe -- 7/7/2011, 3:11 pm
Re: Off Topic: Bulkhead for existing kayak
Mike Savage -- 7/7/2011, 6:19 pm
Re: Off Topic: Bulkhead for existing kayak
David Bynoe -- 7/8/2011, 10:35 am
Re: Off Topic: Bulkhead for existing kayak
Bill Hamm -- 7/8/2011, 6:21 am
Re: Off Topic: Bulkhead for existing kayak
Deano -- 7/8/2011, 9:14 am
Re: Off Topic: Bulkhead for existing kayak
Reg Lake -- 7/7/2011, 4:03 pm
Re: Off Topic: Bulkhead for existing kayak
Steve Hill -- 7/7/2011, 4:39 pm
Re: Off Topic: Bulkhead for existing kayak
george jung -- 7/9/2011, 12:05 am
Re: Off Topic: Bulkhead for existing kayak
Rob Hallett -- 7/7/2011, 4:14 pm
Re: Off Topic: Bulkhead for existing kayak
ancient kayaker -- 7/7/2011, 6:53 pm
Re: Off Topic: Bulkhead for existing kayak
Bill Hamm -- 7/8/2011, 6:24 am
Re: Off Topic: Bulkhead for existing kayak
Mike Savage -- 7/7/2011, 6:28 pm
Re: Off Topic: Bulkhead for existing kayak
Pat -- 7/8/2011, 4:45 am
Interesting little challenge
Jay Babina -- 7/8/2011, 7:57 am
Re: Interesting little challenge
Dave Houser -- 7/8/2011, 3:12 pm
Re: Off Topic: Bulkhead for existing kayak
JohnK -- 7/8/2011, 9:31 pm