Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Other: Making a "Birds Mouth" Canoe Paddle
By:Kurt Maurer
Date: 6/7/2011, 7:39 pm
In Response To: Other: Making a "Birds Mouth" Canoe Paddle *PIC* (Bob Beaullieu)

Very nice! Now tell 'em for me, wouldja? It ain't that hard! In fact, it's really EASY!! Nobody ever believes me, they just nod their heads and try to act polite....

Dude, I love the handles!! What a great way to make a run of blanks, why didn't I think of that? Now you see why I like sharing my stuff on the web -- I get so many good ideas in return!

Fiberglassing the blades can vary. I have glassed one face, both faces, and only the edge, and none of the above on various paddles I've made to see what works best. In short, they all work. I kinda like glassing just the edge since it's the lightest way to go, especially if you use 3.25 oz satin weave. Be sure to cut the cloth on the bias.

: After seeing Kurt Maurer's post and reading about building a
: "Birds Mouth" canoe paddle from his site, I decided
: that I just had to build one of these. So, a couple of weeks
: ago, I cut up some nice clear cedar to make the blade blanks and
: used some left over 3/16" strips to make the shaft.

: The process Kurt describes is really quite easy to follow. I have
: not yet finished the paddles (yes, I made more than one) but am
: getting close. I build 3 adult paddles using the blade of my
: Bending Branches bent shaft as a guide. I also scaled the blade
: down to 80% to make a paddle for my 10 yr old son.

: As of this morning, the blades are all attached to the shafts, the
: handle is attached to my son's paddle and I've cut the handle
: blanks for the rest of the paddles. Still to go is carving the
: rest of the handles, attaching them to the shafts, applying a
: coat of epoxy to the paddles and possibly a 4oz layer of glass
: on the blades (Kurt, do I need to apply glass to the blades?),
: sand lightly, polish with steel wool and apply some tung oil. I
: have not weighed them but can tell you that they are light.
: Holding all the parts for an adult paddle in one hand and my
: Bending Branches bent shaft (19oz) in the other, I can tell you
: that the "Bird's Mouth" paddle is lighter.

: I'm planning to have my son's paddle and one for me ready for a 7
: day canoe trip we are taking June 18-25 on the Oconee River in
: Georgia. I'll have other paddles as well but am hoping the
: "Bird's Mouth" paddles will see a lot of use.

: Following are a few pics of the construction to date...

: Bob Beaullieu

Messages In This Thread

Other: Making a "Birds Mouth" Canoe Paddle *PIC*
Bob Beaullieu -- 6/7/2011, 8:40 am
Re: Other: Making a "Birds Mouth" Canoe Paddle *NM* *PIC*
Bob Beaullieu -- 6/7/2011, 8:42 am
Re: Other: Making a "Birds Mouth" Canoe Paddle *NM* *PIC*
Bob Beaullieu -- 6/7/2011, 8:43 am
Re: Other: Making a "Birds Mouth" Canoe Paddle *NM* *PIC*
Bob Beaullieu -- 6/7/2011, 8:43 am
Re: Other: Making a "Birds Mouth" Canoe Paddle *NM* *PIC*
Bob Beaullieu -- 6/7/2011, 8:45 am
Re: Other: Making a "Birds Mouth" Canoe Paddle *NM* *PIC*
Bob Beaullieu -- 6/7/2011, 8:46 am
Re: Other: Making a "Birds Mouth" Canoe Paddle *NM* *PIC*
Bob Beaullieu -- 6/7/2011, 8:46 am
Re: Other: Making a "Birds Mouth" Canoe Paddle
Bill Hamm -- 6/7/2011, 2:12 pm
Re: Other: Making a "Birds Mouth" Canoe Paddle
Kurt Maurer -- 6/7/2011, 7:39 pm
Re: Other: Making a "Birds Mouth" Canoe Paddle
john faas -- 6/7/2011, 10:47 pm
Re: Other: Making a "Birds Mouth" Canoe Paddle
Allan -- 6/8/2011, 3:16 am
Re: Other: Making a "Birds Mouth" Canoe Paddle
Bob Beaullieu -- 6/8/2011, 11:36 am
Re: Other: Making a "Birds Mouth" Canoe Paddle
Bill Hamm -- 6/8/2011, 2:42 pm
Re: Other: Making a "Birds Mouth" Canoe Paddle
Kurt Maurer -- 6/8/2011, 7:53 pm
Re: Other: Making a "Birds Mouth" Canoe Paddle
Bob Beaullieu -- 6/10/2011, 11:30 am
Re: Other: Making a "Birds Mouth" Canoe Paddle
Kurt Maurer -- 6/13/2011, 6:45 pm
Re: Other: Making a "Birds Mouth" Canoe Paddle
Bob Beaullieu -- 6/14/2011, 1:01 pm
Re: Other: Making a "Birds Mouth" Canoe Paddle
Bill Hamm -- 6/15/2011, 8:32 am
Re: Other: Making a "Birds Mouth" Canoe Paddle
Bob Beaullieu -- 6/15/2011, 8:46 am
Re: Other: Making a "Birds Mouth" Canoe Paddle
StephenHJ -- 6/15/2011, 4:04 pm