Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: bending 1st bow strip?
By:Al Edie
Date: 5/19/2011, 9:11 pm
In Response To: Re: Strip: bending 1st bow strip? (Clayton Plunkett)

: Oh yea, 3/16 thick strips is where it's at also.
: Clayton

+1 : 3/16 strips, no bead and cove . Works well, probably little time lost by the time the hassle of doing the routing is factored in, and the boat turns out significantly lighter.

I am close to launching a new Cape Ann Storm SLT built this way, and the success of the project owes a great deal to the generous advice and information offered by participants on this forum. Thanks everyone, I really appreciate the help!

Best regards,

Allan Edie

Messages In This Thread

Strip: bending 1st bow strip? *PIC*
Andrew T -- 5/18/2011, 11:38 pm
Re: Strip: bending 1st bow strip? *NM* *PIC*
Andrew T -- 5/18/2011, 11:39 pm
Re: Strip: bending 1st bow strip? *NM* *PIC*
Andrew T -- 5/18/2011, 11:39 pm
Re: Strip: bending 1st bow strip?
PatrickC -- 5/19/2011, 10:36 am
Re: Strip: bending 1st bow strip?
Noel Bennett -- 5/19/2011, 12:06 am
Re: Strip: bending 1st bow strip?
Allan -- 5/19/2011, 1:28 am
Re: Strip: bending 1st bow strip?
JohnK -- 5/19/2011, 12:44 am
Re: Strip: bending 1st bow strip?
dave g -- 5/19/2011, 12:54 am
Re: Strip: bending 1st bow strip?
Bill Hamm -- 5/19/2011, 1:54 am
Re: Strip: bending 1st bow strip?
Joy -- 5/19/2011, 3:50 pm
Re: Strip: bending 1st bow strip?
Bill Hamm -- 5/19/2011, 9:06 pm
Re: Strip: bending 1st bow strip?
Mike Savage -- 5/20/2011, 8:58 am
Re: Strip: bending 1st bow strip?
Bill Hamm -- 5/20/2011, 10:11 am
Re: Strip: bending 1st bow strip?
george jung -- 5/20/2011, 9:46 pm
Re: Strip: bending 1st bow strip?
Al Edie -- 5/21/2011, 1:04 am
Re: Strip: bending 1st bow strip?
Bill Hamm -- 5/21/2011, 7:39 am
Re: Strip: bending 1st bow strip?
ancient kayaker -- 5/20/2011, 5:40 pm
Re: Strip: bending 1st bow strip? *PIC*
Andrew T -- 5/22/2011, 7:49 pm
Re: Strip: bending 1st bow strip? *NM* *PIC*
Andrew T -- 5/22/2011, 7:53 pm
Re: Strip: bending 1st bow strip? *NM* *PIC*
Andrew T -- 5/22/2011, 7:56 pm
Re: Strip: bending 1st bow strip?
Randy Echtinaw -- 5/22/2011, 9:12 pm
Re: Strip: bending 1st bow strip?
dave g -- 5/22/2011, 11:43 pm
Re: Strip: bending 1st bow strip?
Andrew T -- 5/23/2011, 4:29 pm
Re: Strip: bending 1st bow strip?
ancient kayaker -- 5/24/2011, 1:10 pm
Re: Strip: bending 1st bow strip?
Bill Hamm -- 5/25/2011, 1:51 am
Re: Strip: bending 1st bow strip?
ancient kayaker -- 5/25/2011, 10:10 am
Re: Strip: bending 1st bow strip?
Bill Hamm -- 5/25/2011, 1:34 pm
Re: Strip: bending 1st bow strip?
Clayton Plunkett -- 5/22/2011, 8:33 pm
Re: Strip: bending 1st bow strip?
Clayton Plunkett -- 5/19/2011, 8:47 am
Re: Strip: bending 1st bow strip?
Andrew T -- 5/19/2011, 9:39 am
Re: Strip: bending 1st bow strip?
Clayton Plunkett -- 5/19/2011, 9:54 am
Re: Strip: bending 1st bow strip?
Randy Echtinaw -- 5/19/2011, 11:09 am
Re: Strip: bending 1st bow strip?
Bill Hamm -- 5/19/2011, 9:08 pm
Re: Strip: bending 1st bow strip?
Bryan Kapteyn -- 5/20/2011, 10:53 am
Re: Strip: bending 1st bow strip?
Randy Echtinaw -- 5/20/2011, 5:05 pm
Re: Strip: bending 1st bow strip?
Etienne Muller - ireland -- 5/21/2011, 3:46 am
Re: Strip: bending 1st bow strip?
Al Edie -- 5/19/2011, 11:32 am
Re: Strip: bending 1st bow strip?
Joe Whitman -- 5/19/2011, 12:37 pm
Re: Strip: bending 1st bow strip?
Andrew T -- 5/19/2011, 2:11 pm
Re: Strip: bending 1st bow strip?
Clayton Plunkett -- 5/19/2011, 3:41 pm
Re: Strip: bending 1st bow strip?
Clayton Plunkett -- 5/19/2011, 3:42 pm
Re: Strip: bending 1st bow strip?
Bill Hamm -- 5/19/2011, 9:10 pm
Re: Strip: bending 1st bow strip?
Al Edie -- 5/19/2011, 9:11 pm
Re: Strip: bending 1st bow strip?
Clayton Plunkett -- 5/20/2011, 9:26 am
Re: Strip: bending 1st bow strip?
Al Edie -- 5/21/2011, 12:44 am