Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: Glassing the hull
By:Bill Hamm
Date: 4/5/2011, 1:11 am
In Response To: Re: Strip: Glassing the hull (JohnK)

: Hi Paul,
: You can put on two layers together.
: Some put the football under the glass, and others over the top.
: Even if you do it separate, you don't need to wait very long.
: Tack dry is enough. Then you get a chemical bond still, whereas the
: other way it is only mechanical.
: Do it asap.
: JohnK

: JohnK

The epoxy doesn't have to be tacky to get a chemical bond, the epoxy takes about a week to get about 75% of the total cure and about a month to get a full cure at room temperatures. Anytime in that first week will work fine and still have a chemical bond.

6 ounce is fairly heavy already, 12 ounce is bulletproof also as mentioned will be pretty heavy. Putting a second ply on the football "might" make sense for a rugged boat, doing two layers of 6 ounce on the whole boat though is overkill. Smaller layers, like the football should go on after the hull is covered otherwise you stand a good chance of trapping air where there is an overlap, no strength where air is trapped.

Bill H.
Bill H.

Messages In This Thread

Strip: Glassing the hull
Paul Lueders -- 4/4/2011, 8:32 pm
Re: Strip: Glassing the hull
george jung -- 4/4/2011, 11:05 pm
Re: Strip: Glassing the hull
JohnK -- 4/4/2011, 11:35 pm
Re: Strip: Glassing the hull
Bill Hamm -- 4/5/2011, 1:11 am
Re: Strip: Glassing the hull
JohnK -- 4/5/2011, 4:33 am
Re: Strip: Glassing the hull
Paul Lueders -- 4/5/2011, 6:56 am
Re: Strip: Glassing the hull
Ian Johnson -- 4/5/2011, 7:04 pm
Re: Strip: Glassing the hull
Bill Hamm -- 4/6/2011, 1:03 am