Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: S&G: Pad eye sealing
By:Farback
Date: 3/26/2011, 5:35 pm
In Response To: S&G: Pad eye sealing *PIC* (Sean Dawe)

: I'm putting semi-soft pad eyes in my new boat. I using
: 3/4"webbing but I've made plywood backing plates (see
: image). I like the idea of the flat plate for making a good
: waterproof seal. My question is does anybody know of a
: sealer/adhesive that will allow me to remove the pad eye should
: I need to? When you think of it, the pad eye does not need to be
: glued in super solid. By nature, the pad eye wants to pull out
: of the hull and any pressure to push it back in through the hull
: would be minimal.

: Any suggestions for a sealer/adhesive that will allow removal -
: with some prying, obviously?

: Sean

I started using this, recommended by Bill Hamm. He says it will come off easier that silicon when it's time to re-varnish.
http://www.sashcosealants.com/home_improvement/lexel.aspx

Kirk

Messages In This Thread

S&G: Pad eye sealing *PIC*
Sean Dawe -- 3/26/2011, 4:42 pm
Re: S&G: Pad eye sealing
Farback -- 3/26/2011, 5:35 pm
Re: S&G: Pad eye sealing
Kurt Maurer -- 3/26/2011, 7:15 pm
Re: S&G: Pad eye sealing
Sean Dawe -- 3/26/2011, 9:27 pm
Re: S&G: Pad eye sealing
Bill Hamm -- 3/27/2011, 1:30 am
Re: S&G: Pad eye sealing
Sean Dawe -- 3/27/2011, 8:03 pm
Re: S&G: Pad eye sealing
Farback -- 3/27/2011, 8:11 pm
Re: S&G: Pad eye sealing
Sean Dawe -- 3/27/2011, 8:24 pm
Re: S&G: Pad eye sealing
Bill Hamm -- 3/28/2011, 1:04 am
Re: S&G: Pad eye sealing
Bill Hamm -- 3/28/2011, 1:01 am
Re: S&G: Pad eye sealing
Bill Hamm -- 3/28/2011, 1:02 am
Re: S&G: Pad eye sealing
Sean Dawe -- 3/28/2011, 7:28 am
Re: S&G: Pad eye sealing
Bill Hamm -- 3/29/2011, 1:59 am
Re: S&G: Pad eye sealing
Sean Dawe -- 3/29/2011, 8:04 am
Re: S&G: Pad eye sealing
Bill Hamm -- 3/30/2011, 1:46 am
Re: S&G: Pad eye sealing
Clayton Plunkett -- 3/27/2011, 10:46 am
Re: S&G: Pad eye sealing
Damian wentzel -- 3/27/2011, 10:52 am
Re: S&G: Pad eye sealing
Bill Hamm -- 3/28/2011, 1:21 am
Re: S&G: Pad eye sealing
Paul G. Jacobson -- 3/28/2011, 3:22 am
Re: S&G: Pad eye sealing
Sean Dawe -- 3/28/2011, 7:41 am