Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Thanks for the Offsets....
By:Clayton Plunkett
Date: 3/24/2011, 9:02 pm
In Response To: Thanks for the Offsets.... (Bob Beaullieu)

: Tom,

: Thanks very much for posting the offsets. After seeing Clayton's
: pictures of his strip Nikumi, I had an immediate interest in
: building one as well. With regards to Bill Hamm's note about
: needing Rob Macks plans to be able to construct the bow and
: stern sections, I already have Firestar plans that my wife gave
: me for Christmas so may be building both a Nikumi and a Firestar
: when time allows.....

: Thanks again,

: Bob
Wow thanks Bob,
That's a complement.
I admit I had loads of fun with this one. Fairing the offsets into hull stations and then stacking them up to see what it looked like was rewarding. Then striping the hull and comparing it to my skin version was quite different than tracing full size station plans.
If you go through with it I will be happy to answer questions or explain what I did if you want.
Clayton

Messages In This Thread

Launching: The Strip built Nikumi *PIC*
Clayton Plunkett -- 3/22/2011, 6:19 pm
Re: Launching: The Strip built Nikumi *PIC*
Clayton Plunkett -- 3/22/2011, 6:23 pm
Re: Launching: The Strip built Nikumi
Ian Cummins -- 3/22/2011, 8:17 pm
Re: Launching: The Strip built Nikumi
Clayton Plunkett -- 3/22/2011, 8:54 pm
Re: Launching: The Strip built Nikumi
george jung -- 3/25/2011, 1:49 pm
Re: Launching: The Strip built Nikumi
Bill Hamm -- 3/25/2011, 3:58 pm
Re: Launching: The Strip built Nikumi
george jung -- 3/25/2011, 8:40 pm
Re: Launching: The Strip built Nikumi
Bill Hamm -- 3/25/2011, 9:10 pm
Re: Launching: The Strip built Nikumi
Kevin McAtee -- 5/7/2011, 1:13 am
Re: Launching: The Strip built Nikumi *PIC*
Clayton Plunkett -- 3/22/2011, 6:26 pm
Re: Launching: The Strip built Nikumi
Bill Hamm -- 3/22/2011, 7:10 pm
Re: Launching: The Strip built Nikumi
Malcolm Schweizer -- 3/22/2011, 7:37 pm
Re: Launching: The Strip built Nikumi
Joe Whitman -- 3/22/2011, 7:39 pm
Re: Launching: The Strip built Nikumi
Clayton Plunkett -- 3/22/2011, 8:57 pm
Re: Launching: The Strip built Nikumi
Etienne Muller - ireland -- 3/23/2011, 9:10 am
Re: Launching: The Strip built Nikumi
Bob Beaullieu -- 3/23/2011, 2:34 pm
Re: Launching: The Strip built Nikumi *PIC*
Tom Yost -- 3/23/2011, 10:58 am
Re: Launching: The Strip built Nikumi
Bill Hamm -- 3/23/2011, 1:45 pm
Re: Launching: The Strip built Nikumi
Clayton Plunkett -- 3/23/2011, 3:17 pm
Re: Launching: The Strip built Nikumi
Bill Hamm -- 3/23/2011, 3:57 pm
Re: Launching: The Strip built Nikumi
Tom Yost -- 3/23/2011, 6:49 pm
Re: Launching: The Strip built Nikumi
Bill Hamm -- 3/23/2011, 7:11 pm
Strip Nikumi Offsets??
Bob Beaullieu -- 3/23/2011, 7:08 pm
Re: Strip Nikumi Offsets?? *PIC*
Tom Yost -- 3/23/2011, 8:25 pm
Thanks for the Offsets....
Bob Beaullieu -- 3/24/2011, 6:30 am
Re: Thanks for the Offsets....
Bill Hamm -- 3/24/2011, 7:31 am
Re: Thanks for the Offsets....
Bob Beaullieu -- 3/24/2011, 7:42 am
Re: Thanks for the Offsets....
Bill Hamm -- 3/24/2011, 9:06 am
building time, with family and friends
Paul G. Jacobson -- 3/24/2011, 2:17 pm
Re: building time, with family and friends
Bob Beaullieu -- 3/25/2011, 7:55 am
Re: building time, with family and friends
Bill Hamm -- 3/25/2011, 9:17 am
Re: building time, with family and friends
Clayton Plunkett -- 3/25/2011, 11:18 am
Re: building time, with family and friends
Bill Hamm -- 3/25/2011, 11:36 am
Re: Thanks for the Offsets.... *PIC*
KenSutherland -- 3/25/2011, 11:27 am
Re: Thanks for the Offsets....
Clayton Plunkett -- 3/24/2011, 9:02 pm
Re: Thanks for the Offsets....
Bob Beaullieu -- 3/25/2011, 7:51 am
Re: Thanks for the Offsets....
Bill Hamm -- 3/25/2011, 9:21 am
Re: Thanks for the Offsets....
Clayton Plunkett -- 3/25/2011, 11:14 am
Re: Thanks for the Offsets....
Bill Hamm -- 3/25/2011, 11:38 am
Re: Thanks for the Offsets.... *PIC*
Tom Yost -- 3/25/2011, 1:07 pm
Re: Thanks for the Offsets....
Bill Hamm -- 3/25/2011, 3:59 pm
Re: Strip Nikumi Offsets??
Bill Hamm -- 3/23/2011, 9:14 pm