Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Skin-on-Frame: What's the best sanding method
By:Todd Olson
Date: 3/14/2011, 8:08 pm

: A wood rasp and some sand paper work just dandy, though there's
: some sweat equity required. A dremel/rotary tool works a charm,
: too, with those little sanding drums.
: But, you should always keep in mind that, once the skin is on, most
: of those frames will never be seen or touched ever again!

: That being said, if you can wrangle a spindle sander out of the
: deal, then that's OK, too . . . .

Thanks Dave. Really all I'm doing is taking the sharp edge off the frame edges and stringers right?..... I have no interest in extensive sanding on Lynn's Kayak as it will be painted anyway. I'll spend a bit more time on mine since I plan on doing the clear vinyl covering.

Messages In This Thread

Skin-on-Frame: What's the best sanding method
Todd Olson -- 3/14/2011, 7:35 pm
Re: Skin-on-Frame: What's the best sanding method
Dave Gentry -- 3/14/2011, 7:54 pm
Re: Skin-on-Frame: What's the best sanding method
Todd Olson -- 3/14/2011, 8:08 pm
Re: Skin-on-Frame: What's the best sanding method *PIC*
Paul G. Jacobson -- 3/15/2011, 2:42 am
Re: Skin-on-Frame: What's the best sanding method
Paul R -- 3/14/2011, 10:54 pm
Re: Skin-on-Frame: What's the best sanding method
Bill Hamm -- 3/15/2011, 12:51 am
Re: Skin-on-Frame: What's the best sanding method
Bill Hamm -- 3/15/2011, 12:52 am
Re: Skin-on-Frame: What's the best sanding method
Brian Nystrom -- 3/15/2011, 7:01 am
Re: Skin-on-Frame: What's the best sanding method
ancient kayaker -- 3/15/2011, 7:10 pm
Re: Skin-on-Frame: What's the best sanding method
Brian Nystrom -- 3/16/2011, 6:42 am
10 inch sanding disk *PIC*
Paul G. Jacobson -- 3/15/2011, 7:12 pm
Re: 10 inch sanding disk
Bill Hamm -- 3/16/2011, 12:32 am
Re: 10 inch sanding disk
Brian Nystrom -- 3/16/2011, 6:47 am
Re: 10 inch sanding disk
ancient kayaker -- 3/16/2011, 10:21 am
Re: 10 inch sanding disk
Bill Hamm -- 3/17/2011, 12:20 am
Re: Skin-on-Frame: What's the best sanding method
Eric -- 3/16/2011, 7:44 pm
Re: Skin-on-Frame: What's the best sanding method
Bill Hamm -- 3/17/2011, 12:22 am
spindle sanding method
Paul G. Jacobson -- 3/17/2011, 5:28 am
Re: spindle sanding method
Bill Hamm -- 3/17/2011, 6:57 am
Re: spindle sanding method
Eric -- 3/17/2011, 3:19 pm
Re: Skin-on-Frame: What's the best sanding method
Jay Babina -- 3/17/2011, 8:51 am
Re: Skin-on-Frame: What's the best sanding method
eric Ogata -- 3/17/2011, 10:59 am