Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Shop: Webbing Deck Attachment Points - How to
By:dave g
Date: 2/27/2011, 10:04 pm

: I'm not the inventor of this method, but here's some pictures and
: instructions on making a jig and producing webbing attachment
: points.

: Kirk

:
: http://farback.ca/index.php?option=com_content&view=article&id=23&Itemid=27

I just finished doing the same thing but I used 3/4 nylon webbing. My jig looks remakably the same as yours but mine was made of two copper blocks I found that had a 3/4 groove deep enough on each to fit the folded webbing (fluke and incredible luck I know).
I found that after making ten of them using the propane torch I put them through quality control by flicking and twisting and abusing the melted area a bit and they all were very brittle and broke ridiculously easily.
After learning this I tried using a heat gun which melted the webbing without fire or smoke and these fittings easily passed the abuse test. Glad I did this before putting them in the boat. I bet this is very subject to the exact material being melted... my suggestion do one or two and abuse them a little to make sure they are tough enough to go into service.

dave g

Messages In This Thread

Shop: Webbing Deck Attachment Points - How to *PIC*
Farback -- 2/27/2011, 9:06 pm
Re: Shop: Webbing Deck Attachment Points - How to
dave g -- 2/27/2011, 10:04 pm
Re: Shop: Webbing Deck Attachment Points - How to
Bill Hamm -- 2/28/2011, 12:08 am
Re: Shop: Webbing Deck Attachment Points - How to
Kirk Fredericks - Farback Carpentry and Automation -- 2/28/2011, 10:17 am
Re: Shop: Webbing Deck Attachment Points - How to *PIC*
mtkayak (Mike Trutwin) -- 2/28/2011, 12:45 pm
Re: Shop: Webbing Deck Attachment Points - How to
Paul G. Jacobson -- 2/28/2011, 1:42 pm
Words Of Wisdom
Kurt Maurer -- 2/28/2011, 8:21 pm
Re: Words Of Wisdom
dave g -- 2/28/2011, 11:01 pm
Re: Words Of Wisdom
Bill Hamm -- 3/1/2011, 2:09 am
Re: Words Of Wisdom
Brian Nystrom -- 3/1/2011, 7:00 am
Re: Words Of Wisdom
Sean Dawe -- 3/1/2011, 7:50 am
Re: Words Of Wisdom
Kirk Fredericks - Farback Carpentry and Automation -- 3/1/2011, 6:43 am
Re: Words Of Wisdom
Bill Hamm -- 3/2/2011, 1:23 am
Re: Words Of Wisdom
Noel Bennett -- 3/1/2011, 8:08 pm
Re: Words Of Wisdom
John Roberts -- 3/2/2011, 5:08 am
Re: Shop: Webbing Deck Attachment Points - How to
Paul MacIntyre -- 2/28/2011, 8:34 am
Re: Shop: Webbing Deck Attachment Points - How to
Kirk Fredericks - Farback Carpentry and Automation -- 2/28/2011, 10:15 am
Re: Shop: Webbing Deck Attachment Points - How to
Bill Hamm -- 3/1/2011, 2:13 am
Re: Shop: Webbing Deck Attachment Points - How to
Farback -- 3/1/2011, 6:04 pm
Re: Shop: Webbing Deck Attachment Points - How to
Kirk Fredericks - Farback Carpentry and Automation -- 2/28/2011, 10:19 am
Shade Tree Engineering
Kurt Maurer -- 3/1/2011, 7:05 pm