Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: S&G: Resin and hardner.
By:Fred Gasper
Date: 2/8/2011, 7:33 am
In Response To: S&G: Resin and hardner. (mlanford)

I got a gallon and a half with the Pygmy Arctic Tern 14. Using 6 oz. glass outside of deck and hull and just bottom of hull on inside I used just over a gallon. Sounds like about your use if you double the glass on the outside. I'd get a gallon+. I guess this means 1 1/2 for Dystem 3 or Raka.

: I am working on gathering supplies for a stitch and glue kayak and
: need to know how much resin and hardener I may need. 14 foot
: boat. This is my first attempt and want to have enough material
: but not a lot of waste. Thanks

Messages In This Thread

S&G: Resin and hardner.
mlanford -- 2/7/2011, 3:01 pm
Re: S&G: Resin and hardner.
MattD -- 2/7/2011, 5:56 pm
Re: S&G: Resin and hardner.
Charlie -- 2/7/2011, 6:13 pm
Re: S&G: Resin and hardner.
mlanford -- 2/7/2011, 6:40 pm
Re: S&G: Resin and hardner.
mlanford -- 2/7/2011, 6:44 pm
Re: S&G: Resin and hardner.
Bill Hamm -- 2/8/2011, 12:25 am
nominal gallon is best pricewise
Paul G. Jacobson -- 2/7/2011, 11:36 pm
Re: S&G: Resin and hardner.
Bill Hamm -- 2/8/2011, 12:21 am
Re: S&G: Resin and hardner.
Fred Gasper -- 2/8/2011, 7:33 am