Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: 3.2 oz Questions
In Response To: Re: Strip: 3.2 oz Questions ()

: Sounds like a very reasonable layup. A single layer outside is
: pretty light, dents very easily, ok for an extremely light boat
: only used in deep water but you have to be very careful with it,
: double layer on the outside will take much more abuse.

: No point at all of fill coats between layers, none.

: Single layer inside and extra where wear would be expected is a
: good idea, shouldn't need a double layer in the whole inside.

: Bill H.

Btw, I prefer doing one layer at a time and letting it set up tack free between layers. Many do both layers at once, harder to keep the wrinkles out that way.

Bill H.