Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Epoxy: Split the boat
By:Jay Babina
Date: 1/21/2011, 8:02 am
In Response To: Re: Epoxy: Split the boat (Paul Rummler)

I would put some heat lamps inside the boat or a small space heater and really get it hot and see if that triggers the hardening process. Is it starting to harden at all or just as liquid as when you applied it?

Messages In This Thread

Epoxy: Split the boat
Paul Rummler -- 1/20/2011, 8:25 pm
Re: Epoxy: Split the boat
Allan -- 1/20/2011, 8:42 pm
Re: Epoxy: Split the boat
Paul Rummler -- 1/20/2011, 10:03 pm
Re: Epoxy: Split the boat
Jay Babina -- 1/21/2011, 8:02 am
Re: Epoxy: Split the boat
Mike Bielski -- 1/21/2011, 8:09 am
Go Mike
Kurt Maurer -- 1/21/2011, 7:11 pm
Re: Epoxy: Split the boat
John D. -- 1/21/2011, 1:39 am
Re: Epoxy: Split the boat
Bill Hamm -- 1/20/2011, 8:42 pm
Re: Epoxy: Split the boat
Randy Echtinaw -- 1/21/2011, 6:03 am
Re: Epoxy: Split the boat
Bill Hamm -- 1/21/2011, 6:39 am
Re: Epoxy: Split the boat
Randy Echtinaw -- 1/21/2011, 7:13 am
Re: Epoxy: Split the boat
Bill Hamm -- 1/21/2011, 8:57 am
Re: Epoxy: Split the boat
Les Cheeseman -- 1/21/2011, 9:07 am
Re: Epoxy: Split the boat
Eric -- 1/21/2011, 11:25 am
Re: Epoxy: Split the boat
Bill Hamm -- 1/21/2011, 3:04 pm
Re: Epoxy: Split the boat
Bill Hamm -- 1/21/2011, 3:05 pm
Re: Epoxy: Split the boat
dhwdaniels -- 1/21/2011, 5:22 pm
Epoxy: getting good mixes *PIC*
Paul G. Jacobson -- 1/21/2011, 4:26 pm
Re: Epoxy: getting good mixes
Bill Hamm -- 1/21/2011, 5:47 pm
Re: Epoxy: getting good mixes
Bill Hamm -- 1/21/2011, 5:54 pm
Re: Epoxy: Split the boat
Paul Rummler -- 1/21/2011, 11:42 pm
Re: Epoxy: Split the boat *PIC*
Etienne Muller - ireland -- 1/21/2011, 7:34 am
Re: Epoxy: Split the boat
mark j -- 1/21/2011, 9:37 am
Re: Epoxy: Split the boat
Etienne Muller - ireland -- 1/21/2011, 5:39 pm
Re: Epoxy: Split the boat
Bill Hamm -- 1/21/2011, 5:50 pm
Re: Epoxy: Split the boat
dave g -- 1/21/2011, 9:02 pm
Re: Epoxy: Split the boat
Bill Hamm -- 1/21/2011, 9:02 am
Re: Epoxy: Split the boat
Robert N Pruden -- 1/21/2011, 10:10 am
Re: Epoxy: Split the boat
Randy Echtinaw -- 1/21/2011, 11:15 am
Re: Epoxy: Split the boat
Les Cheeseman -- 1/21/2011, 11:30 am
Re: Epoxy: Split the boat
Bill Hamm -- 1/21/2011, 3:11 pm
Re: Epoxy: Split the boat
Bill Hamm -- 1/21/2011, 3:07 pm
Bad Epoxy, But Don't Split the boat
Paul G. Jacobson -- 1/21/2011, 3:18 pm
The boat is split
Paul Rummler -- 1/21/2011, 11:33 pm
Re: The boat is split
Bill Hamm -- 1/22/2011, 1:02 am
Re: The boat is split
Al Edie -- 1/23/2011, 1:04 pm
Re: The boat is split
Bill Hamm -- 1/24/2011, 12:41 am
Aw #@&*!
Paul G. Jacobson -- 1/24/2011, 4:32 am
Re: Aw #@&*!
Bill Hamm -- 1/24/2011, 8:50 am
Re: Aw #@&*!
Al Edie -- 1/24/2011, 10:39 am
Re: Aw #@&*!
Bill Hamm -- 1/24/2011, 2:33 pm
Re: Aw #@&*!
Mike Savage -- 1/25/2011, 7:04 am
Re: Aw #@&*!
Bill Hamm -- 1/26/2011, 2:07 am
Re: Aw #@&*!
Mike Savage -- 1/26/2011, 2:42 am
Re: Aw #@&*!
Bill Hamm -- 1/27/2011, 12:45 am
Re: Aw #@&*!
Bill Hamm -- 1/27/2011, 12:46 am
Re: Aw #@&*!
Mike Savage -- 1/27/2011, 5:53 am
Re: Aw #@&*!
Robert N Pruden -- 1/26/2011, 9:05 am
Re: Aw #@&*!
Bill Hamm -- 1/27/2011, 12:47 am