Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: ripping boards
By:Dan Caouette (CSFW)
Date: 1/18/2011, 5:21 am
In Response To: Re: Strip: ripping boards (Bill Hamm)

: As long as the mandrel on the table saw is long enough to safely
: lock the blades down it should work, also adds a big level of
: danger of kickback with strips with a saw blade on each side.

: I'd much prefer to take my time and increase the safety.

I gang rip up to 3 strips all the time... BUT (big caveat) only with a powerfeeder. It's about the only safe way of doing it.

Messages In This Thread

Strip: ripping boards
jwuts -- 1/17/2011, 1:33 pm
Re: Strip: ripping boards
Paul G. Jacobson -- 1/17/2011, 5:37 pm
Re: Strip: ripping boards
Kurt Maurer -- 1/17/2011, 7:03 pm
Re: Strip: ripping boards
Paul G. Jacobson -- 1/17/2011, 11:39 pm
Re: Strip: ripping boards
Bill Hamm -- 1/18/2011, 1:48 am
Re: Strip: ripping boards
Dan Caouette (CSFW) -- 1/18/2011, 5:21 am