: Get a piece of aluminum foil about a foot square. Fold it in half
: and set it over the form and your reease tape. Hopefully it will
: divert enough heat so your tape doesn't melt. f you end up
: stapling the strip in place and trap the foil, just tear it off
: neatly or let the excess stay there to protect the area when you
: heat the next strip. If you get enough epoxy leaking between the
: strips to glue the foil to the inside you can sand it away
: easily. It will be very obvious! It will certainly serve as a
: release layer even if the tape melts away, so you will not have
: your forms glued to your strips.

: PGJ

Good answer. Thanks.