Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Strip: perils and pitfalls of heatguns
By:george jung
Date: 1/17/2011, 10:29 pm

Just started stripping a new kayak; put my cheater strip on, then my first near-shear strip, using the heatgun to relax the strip at the upswept ends. Works like a charm, btw - but I managed to melt the plastic tape I use as a release barrier on the forms. Could be a problem when I get to the epoxy stage, eh?

I fixed the offended barrier, and now hold the strip out a bit while heating it. But it's not quite as elegant a method as holding the strip around the curve of the preceding strip, and exactly heating/bending the new strip.

Any way to have it my way?

Messages In This Thread

Strip: perils and pitfalls of heatguns
george jung -- 1/17/2011, 10:29 pm
Re: Strip: perils and pitfalls of heatguns
Paul G. Jacobson -- 1/17/2011, 11:28 pm
Re: Strip: perils and pitfalls of heatguns
george jung -- 1/18/2011, 12:12 am
Re: Strip: perils and pitfalls of heatguns
Bill Hamm -- 1/18/2011, 1:36 am