Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: Wood/grain quality for strips
By:dave g
Date: 1/8/2011, 12:26 am
In Response To: Re: Strip: Wood/grain quality for strips (Al Edie)

: I second Bill's advice on accepting unsorted wood. The likelihood
: of getting much useful material is remote. Even here in British
: Columbia where lots of WRC grows, the quality of the non-clear
: cedar lumber is extremely mixed. There is often decent stuff in
: there if you are allowed to be selective, but it is a small
: minority of the boards in the pile.

: Good luck,

: Best regards,

: Allan Edie

Where in B.C. do you live? I live in Kelowna

dave g

Messages In This Thread

Strip: Wood/grain quality for strips
Stephen Troy -- 1/7/2011, 5:16 pm
Re: Strip: Wood/grain quality for strips *PIC*
Kurt Maurer -- 1/7/2011, 6:53 pm
Re: Strip: Wood/grain quality for strips
Stephen Troy -- 1/7/2011, 7:16 pm
Re: Strip: Wood/grain quality for strips
Kurt Maurer -- 1/7/2011, 8:37 pm
Re: Strip: Wood/grain quality for strips
Stephen Troy -- 1/8/2011, 12:38 pm
Re: Strip: Wood/grain quality for strips *PIC*
Tony Olsen -- 1/7/2011, 10:20 pm
Re: Strip: Wood/grain quality for strips
Bill Hamm -- 1/8/2011, 7:12 am
Re: Strip: Wood/grain quality for strips
Bill Hamm -- 1/7/2011, 7:00 pm
Re: Strip: Wood/grain quality for strips
george jung -- 1/7/2011, 7:30 pm
Re: Strip: Wood/grain quality for strips
Al Edie -- 1/7/2011, 10:23 pm
Re: Strip: Wood/grain quality for strips
Don T -- 1/7/2011, 10:47 pm
Re: Strip: Wood/grain quality for strips
Al Edie -- 1/8/2011, 1:23 pm
Re: Strip: Wood/grain quality for strips
dave g -- 1/8/2011, 12:26 am
Re: Strip: Wood/grain quality for strips
Al Edie -- 1/8/2011, 1:03 pm
Re: Strip: Wood/grain quality for strips
Bill Hamm -- 1/8/2011, 1:13 pm
Re: Strip: Wood/grain quality for strips
Al Edie -- 1/8/2011, 1:25 pm
Re: Strip: Wood/grain quality for strips
Bill Hamm -- 1/8/2011, 1:41 pm
Re: Strip: Wood/grain quality for strips
Al Edie -- 1/8/2011, 6:08 pm
Re: Strip: Wood/grain quality for strips
Bill Hamm -- 1/9/2011, 12:41 am
Re: Strip: Wood/grain quality for strips
Bill Hamm -- 1/9/2011, 12:43 am
Re: Strip: Wood/grain quality for strips
Al Edie -- 1/9/2011, 11:21 am
Re: Strip: Wood/grain quality for strips
dave g -- 1/9/2011, 12:51 am
Re: Strip: Wood/grain quality for strips
Al Edie -- 1/9/2011, 10:58 am
Re: Strip: Wood/grain quality for strips *PIC*
Tim Sheehan -- 1/8/2011, 12:59 am
Re: Strip: Wood/grain quality for strips
Randy Echtinaw -- 1/8/2011, 7:52 am
Re: Strip: Wood/grain quality for strips
Bill Hamm -- 1/8/2011, 8:40 am
Thanks!
Stephen Troy -- 1/8/2011, 8:09 pm
Re: Thanks!
Don T -- 1/8/2011, 9:08 pm
Re: Thanks!
ancient kayaker -- 1/14/2011, 6:03 pm