Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: coaming riser construction

: I suspect that if you don't glass the riser you'll destroy it
: trying to bend the lip onto it, the bare strips specially with a
: sharp edge connection to the deck arn't all that strong.

: Need to cut the wood for the lip to whatever thickness it requires
: to be bent, depends much on the wood.

: Bill H.

Would you suggest glassing the inside and outside of the riser before bending the lip? Also what is a "standard" layup for the coaming and riser? I am using the thayercraft 3.2oz.

thanks
dave g

Messages In This Thread

Strip: coaming riser construction
Re: Strip: coaming riser construction
Re: Strip: coaming riser construction
Re: Strip: coaming riser construction
Re: Strip: coaming riser construction
Re: Strip: coaming riser construction
Re: Strip: coaming riser construction
Re: Strip: coaming riser construction
Re: Strip: coaming riser construction