Bill thanks for taking a look at this. I'm no mathematician.

The mast sizes are in the picture. The ama beam is 11 1/2 feet, the ama's length is 36 inches, the circumference in the middle is 34" and they are shaped like a banana. I have foam in most of the tubing for floatation and maybe some extra strength in the aka’s and the mast.

One minor problem, I tried to stay safe when epoxying but I must have push epoxy in front of the insert tubes so the inserts only go in about 14 inches instead of 18 inches. If I can't chip or sand off the extra epoxy way back inside the tubes I will have to cut off 4 inches of insert tubing. The plans of mice and men and Murphy’s Law were at work.

John