: My current project was done all stapeless. I hardly used any clamps at all. I
: hot-glued the strips to the forms and between stations I used plain old
: paper masking tape. I used a combination of 1" and 2" wide tape
: spaced 3-9" depending on how much force I needed. Occasionally I
: would use a spring clamp to hold strips even to each other. Worked great.

: Dan

that's pretty much what I did. When I first started with the thin strips I didn't think to use tape, I was just mainly using hot glue. Once I did the strips on the workbench I started to use more tape. That's why I was thinking I would put the strips directly on the boat next time, using tape.

cheers