Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Material: Wear points on bow
By:Joe Whitman
Date: 9/8/2010, 1:05 pm
In Response To: Re: Material: Wear points on bow (Don Goss)

Thanks guys, I am defiantly going to add a few more layers of glass. I think I had three layers of 6oz. on there, must have hit a rock. We had some pretty big rollers hitting the beach one of the times and came in pretty hard. The 3m protective tape seems worth a try I looked it up. 3M says it is good for marine application; it’s expensive though, about $40 for a half roll.

Messages In This Thread

Material: Wear points on bow
Joe Whitman -- 9/7/2010, 1:38 pm
Re: Material: Wear points on bow
Don Goss -- 9/8/2010, 8:15 am
Re: Material: Wear points on bow
Joe Whitman -- 9/8/2010, 1:05 pm
Re: Material: Wear points on bow
Paul G. Jacobson -- 9/8/2010, 12:44 am
Re: Material: Wear points on bow
Bill Hamm -- 9/7/2010, 4:14 pm
Re: Material: Wear points on bow
Scott Boedeker -- 9/7/2010, 2:30 pm
Re: Material: Wear points on bow
Joe Whitman -- 9/7/2010, 2:42 pm
Re: Material: Wear points on bow
Eric -- 9/7/2010, 2:45 pm