Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Tools: Table saw safety device
By:Brian Nystrom
Date: 5/30/2010, 7:05 am
In Response To: Re: Tools: Table saw safety device (Problem with the saw stop)

: Once you
: start putting a device like the saw stop on things, there is a
: chance that there will be a lax attitude about safety practices
: that would formally exist without them.

You need to look no further than driving statistics for confirmation. Roads are better, cars are better built and they're bristling with safety devices (roll cage, construction, seat belts, air bags, ABS, TCS, AWD, etc., but the number of fatalities annually has not dropped. People are far less engaged in the activity of driving because all of these "advances" allow them to turn their brains off and ignore the need to learn driving skills, so accidents still happen at an alarming rate. It's the reason that the most common vehicles one sees in the ditch during the winter up here are SUVs. People have a sense of invincibility and they assume that they can drive as fast as they want and the vehicle will deal with anything that comes up.

What I suspect will happen with the Saw Stop is that when faced with a choice in setting up for a challenging cut or when one is in a hurry, learned safety practices will be set aside more readily since you have the stop mechanism "just in case". That will inevitably lead to accidents, many of which will probably be completely unrelated to Saw Stop feature.

Messages In This Thread

Tools: Table saw safety device
PatrickC -- 5/27/2010, 9:32 am
Re: Tools: Table saw safety device
Mike -- 5/27/2010, 5:39 pm
Re: Tools: Table saw safety device
Mike Bielski -- 5/27/2010, 11:23 pm
Re: Tools: Table saw safety device
Will Clarke -- 5/27/2010, 11:57 pm
Re: Tools: Table saw safety device
Mike Bielski -- 5/28/2010, 1:11 am
Re: Tools: Table saw safety device
Brian Nystrom -- 5/28/2010, 7:29 am
Re: Tools: Table saw safety device
Mike Bielski -- 5/28/2010, 9:41 am
Re: Tools: Table saw safety device
Ken Blanton -- 5/27/2010, 4:11 pm
Re: Tools: Table saw safety device
Kurt Maurer -- 5/27/2010, 7:08 pm
Re: Tools: Table saw safety device
Brian Nystrom -- 5/27/2010, 10:15 am
Re: Tools: Table saw safety device
Paul MacIntyre -- 5/28/2010, 1:01 am
Re: Tools: Table saw safety device
Brian Nystrom -- 5/28/2010, 7:24 am
Re: Tools: Table saw safety device
Paul MacIntyre -- 5/28/2010, 8:42 am
Re: Tools: Table saw safety device
Paul MacIntyre -- 5/28/2010, 1:05 am
Re: Tools: Table saw safety device
PatrickC -- 5/27/2010, 10:35 am
Re: Tools: Table saw safety device
Glenn -- 5/27/2010, 4:54 pm
Re: Tools: Table saw safety device
Problem with the saw stop -- 5/29/2010, 7:12 pm
Re: Tools: Table saw safety device
Brian Nystrom -- 5/30/2010, 7:05 am
Re: Tools: Table saw safety device
Jay Babina -- 5/30/2010, 8:03 am
Re: Tools: Table saw safety device *NM*
From Jay Babina - above -- 5/29/2010, 7:14 pm