Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: S&G: Help with S&G Design
By:Brian Nystrom
Date: 4/13/2010, 9:22 am
In Response To: Re: S&G: Help with S&G Design *PIC* (Mike)

Unless you're a really big guy and need a really high gear capacity, you might want to rethink the 25" beam. That's rather excessive and it will result in a slow boat. While the stability of a wide beam is comforting, most paddlers "outgrow" wide boats pretty quickly and end up going with something narrower. There's a reason that 17' x 22" boats have become somewhat of a standard in the industry. It's a "sweet spot" that provides the best balance of stability, capacity and performance for most paddlers. If your needs differ from the average, then definitely adjust your design accordingly, but I would suggest going longer if you need more capacity, rather than wider, as you'll end up with a better performing boat that you will likely be happier with in the long term.

Messages In This Thread

S&G: Help with S&G Design
Mike -- 4/12/2010, 12:03 pm
Re: S&G: Help with S&G Design *PIC*
Mike -- 4/12/2010, 12:38 pm
Re: S&G: Help with S&G Design
Brian Nystrom -- 4/13/2010, 9:22 am
Re: S&G: Help with S&G Design *PIC*
Mike -- 4/13/2010, 1:33 pm
Re: S&G: Help with S&G Design
Aaron Locke - Washington Wood Craft -- 4/13/2010, 3:43 pm
Re: S&G: Help with S&G Design
Johnathan Akers -- 4/14/2010, 1:17 pm
Re: S&G: Help with S&G Design
Mike -- 4/14/2010, 4:06 pm
Re: S&G: Help with S&G Design
Malcolm Schweizer -- 4/12/2010, 5:37 pm
Re: S&G: Help with S&G Design *PIC*
Mike -- 4/12/2010, 7:04 pm
Re: S&G: Help with S&G Design *PIC*
Aaron Locke - Washington Wood Craft -- 4/12/2010, 8:15 pm
Re: S&G: Help with S&G Design *PIC*
Aaron Locke - Washington Wood Craft -- 4/12/2010, 9:06 pm
Re: S&G: Help with S&G Design
Aaron Locke - Washington Wood Craft -- 4/12/2010, 5:02 pm