Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Material: Using tung oil
By:George
Date: 3/2/2010, 9:23 am

I asked a German company if they sold japan dryer, to add to tung oil for shortening drying time, for coating my sof frame. This was part of their reply :

"We do not recommend the use of pure Tung oil, except as an additive in oil or laquers. An addition of maximum 10% of Tung oil in linseed oil will shorten the drying time of the oil. If more is added, the layer will crack."

Now i've used pure tung oil before and haven't seen any cracking. Frame already covered with some other indoor oil, just to even everything out, but i would like to use tung oil in the future on lots of other projects.

Messages In This Thread

Material: Using tung oil
George -- 3/2/2010, 9:23 am
Re: Material: Using tung oil
Mike Bielski -- 3/5/2010, 8:23 am
Re: Material: Using tung oil
George -- 3/5/2010, 1:15 pm
Re: Material: Using tung oil
Mike Savage -- 3/6/2010, 5:49 am
Re: Material: Using tung oil
Bill Hamm -- 3/7/2010, 12:45 am
Re: Material: Using tung oil
Mike Savage -- 3/7/2010, 5:38 am
Re: Material: Using tung oil
Bill Hamm -- 3/8/2010, 12:27 am
Re: Material: Using tung oil
Mike Savage -- 3/8/2010, 6:10 am
Re: Material: Using tung oil
Bill Hamm -- 3/9/2010, 12:47 am
Re: Material: Using tung oil
george -- 3/8/2010, 5:24 am
Re: Material: Using tung oil
Mike Bielski -- 3/5/2010, 6:58 pm
Re: Material: Using tung oil
Bill Hamm -- 3/7/2010, 12:43 am
Re: Material: Using tung oil
Brian Nystrom -- 3/6/2010, 9:40 am
Re: Material: Using tung oil
Brian Nystrom -- 3/3/2010, 8:36 am
Re: Material: Using tung oil
George -- 3/4/2010, 4:19 am
Re: Material: Using tung oil
Bill Hamm -- 3/7/2010, 12:31 am
Re: Material: Using tung oil
Brian Nystrom -- 3/4/2010, 7:44 am
Re: Material: Using tung oil
George -- 3/5/2010, 4:36 am
Re: Material: Using tung oil
Brian Nystrom -- 3/5/2010, 7:10 am
Re: Material: Using tung oil
George -- 3/5/2010, 1:06 pm
Re: Material: Using tung oil
George -- 3/8/2010, 12:49 pm
Re: Material: Using tung oil
Mike Savage -- 3/5/2010, 6:29 am
Re: Material: Using tung oil
Brian Nystrom -- 3/5/2010, 7:01 am
Re: Material: Using tung oil
Mike Savage -- 3/5/2010, 2:41 pm
Re: Material: Using tung oil
Mike Bielski -- 3/5/2010, 8:14 am
Re: Material: Using tung oil
Bill Hamm -- 3/7/2010, 12:36 am
Re: Material: Using tung oil
Ben Blackburn -- 3/5/2010, 4:50 am
Re: Material: Using tung oil *PIC*
Ben Blackburn -- 3/4/2010, 11:03 am
Re: Material: Using tung oil
Brian Nystrom -- 3/4/2010, 7:52 pm