Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Skin-on-Frame: Outfitting
By:Foster
Date: 2/18/2010, 11:02 am
In Response To: Skin-on-Frame: Outfitting (Daniel Mouw)

: I built a wood frame Yost Sea ranger last year and would like to be
: able to eskimo roll it, but not sure what additional outfitting
: is required. I am currently building float bags, sea sock, and
: deck rigging.
: What I don't have is:
: -seat (sitting on wooden slats, actually fairly comfortable for the
: short trips I have done)
: -backband
: -foot braces or anything for my
: -thighs support (I have found I can brace my thighs on the skin
: quite comfortably.)

: Can I learn to roll without these items?

I say roll it as it is (with the float bags). As long as you have a good connection with your thighs so you don't fall out (ocean style cockpit) you can roll. I've never had a backband and did my first roll in a boat with no foot bracing. I believe I have rolled a Sea ranger and didn't find it difficult. Stay with a standard layback roll to start.
It might be more comfortable if you have some padding on the floor and where your back hits the coaming. Other than that a good friend/instructor should be able to get you going.

Have fun!
Foster

P.S. If you give your location, lots of people will volunteer to get you started - especially on the first half of the roll. :)

Messages In This Thread

Skin-on-Frame: Outfitting
Daniel Mouw -- 2/17/2010, 12:36 pm
Re: Skin-on-Frame: Outfitting
Chuck -- 2/17/2010, 12:49 pm
Re: Skin-on-Frame: Outfitting
Bill Hamm -- 2/19/2010, 8:15 am
Re: Skin-on-Frame: Outfitting
Foster -- 2/18/2010, 11:02 am
Re: Skin-on-Frame: Outfitting
Daniel Mouw -- 2/18/2010, 2:35 pm
Re: Skin-on-Frame: Outfitting
Foster -- 2/18/2010, 9:55 pm
Re: Skin-on-Frame: Outfitting
Charles Robinson -- 2/18/2010, 8:56 pm
Re: Skin-on-Frame: Outfitting
Bill Hamm -- 2/18/2010, 12:57 am
Re: Skin-on-Frame: Outfitting
Brian Nystrom -- 2/17/2010, 12:52 pm