Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: Cutting Strips
By:Ed Darlington
Date: 10/10/2009, 5:46 am
In Response To: Re: Strip: Cutting Strips *Pic* (fred graus)

: Im not sure you would want to use this wood. It looks like the grain is very
: course, but also, it is running off the board at an angle. I have always
: heard you want the grain running with the board. At places where you have
: to twist and bend the strips they may crack. What type of wood is it? (The
: photo shows strips cut from 1X4 ceder I bought at a local lumber yard in
: Kansas.)
Where in Kansas do you get your 1x4 cedar?

Messages In This Thread

Strip: Cutting Strips
Mrkim -- 10/8/2009, 5:40 pm
Re: Strip: Cutting Strips
Fred Gasper -- 10/9/2009, 6:52 pm
Re: Strip: Cutting Strips
fred graus -- 10/9/2009, 9:09 am
Re: Strip: Cutting Strips *NM* *Pic*
Mrkim -- 10/9/2009, 1:49 pm
Re: Strip: Cutting Strips *Pic*
Mrkim -- 10/9/2009, 1:53 pm
Re: Strip: Cutting Strips *Pic*
fred graus -- 10/9/2009, 3:06 pm
Re: Strip: Cutting Strips
Ed Darlington -- 10/10/2009, 5:46 am
Re: Strip: Cutting Strips
Mac McCaskie -- 10/17/2009, 5:42 pm
Re: Strip: Cutting Strips
Bill Hamm -- 10/11/2009, 12:31 am
Re: Strip: Cutting Strips
Mrkim -- 10/9/2009, 3:24 pm
Re: Strip: Cutting Strips
fred graus -- 10/9/2009, 3:44 pm
Re: Strip: Cutting Strips
Allan -- 10/9/2009, 9:56 pm
Re: Strip: Cutting Strips
Mrkim -- 10/9/2009, 4:17 pm
Re: Strip: Cutting Strips *LINK*
Ian Johnson -- 10/9/2009, 5:04 pm
Re: Strip: Cutting Strips *Pic*
Etienne Muller -- 10/9/2009, 6:26 am
Re: Strip: Cutting Strips
Mrkim -- 10/9/2009, 8:13 am
Re: Strip: Cutting Strips
Bill Hamm -- 10/10/2009, 1:33 am
Re: Strip: Cutting Strips
Brian Nystrom -- 10/9/2009, 8:18 pm
Re: Strip: Cutting Strips
Mac McCaskie -- 10/8/2009, 11:45 pm
Re: Strip: Cutting Strips
Bill Hamm -- 10/8/2009, 5:54 pm
Re: Strip: Cutting Strips
Terry Haines -- 10/11/2009, 12:56 am