Boat Building Forum
Find advice on all aspects of building your own kayak, canoe or any lightweight boats
Re: Strip: true 2"x4" with some slight bending...
In Response To: Strip: true 2"x4" with some slight bending... what to do? (Robert Evans)
I doubt you will ever straighten you MDF and now you know why the 'wiggle' room is there. It's hard to buils anything perfect.
With that said, can you not just open up the hole(s) in the frames so you can shim them? Seems the easiest way to me.
Messages In This Thread
- Strip: true 2"x4" with some slight bending... what to do?
Robert Evans -- 9/18/2009, 11:37 am- Re: Strip: true 2"x4" with some slight bending... *LINK*
Ian Johnson -- 9/19/2009, 3:41 am- use hand pruning saw to open form holes
mike allen -- 9/18/2009, 5:34 pm- Re: Strip: true 2"x4" with some slight bending...
Ric -- 9/18/2009, 2:48 pm- Re: Strip: true 2"x4" with some slight bending...
Kudzu -- 9/18/2009, 2:02 pm - use hand pruning saw to open form holes
- Re: Strip: true 2"x4" with some slight bending... *LINK*
