: I must have messed up b/c when I tacked the hull panel together, quite a bit
: of epoxy leaked to the outside of the hull. Now I have some major drips
: and runs that are dried on the outside. I've sanded as much as I can, but
: they are still visible. When I fiberglass the outside, will the runs and
: drips be visible or will it blend in?
: thanks

Most of it will go away. I'd first seal the wood, epoxy coat it, then you'll see what if anythnig needs to be removed. If the boat is to be finished bright (varnished) you'll want to have it as perfect as possible and you don't want to sand thru the outer veneer. If it's to be painted it won't make a difference as the paint hides the mistakes

Bill H.