Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: Cheater strips
By:Scott Fitzgerrell
Date: 2/10/2009, 8:23 am
In Response To: Strip: Cheater strips (mtkayak)

: First time builder. Any tips for making those bow cheater strips fit tight to
: the very feathered end? I'm using a rolling bevel and not cove and bead. I
: was able to get a tight fit right down to about the final 4 inches of the
: very point. Planing that thin end seemed to either break it off or rip it
: out. Sanding seamed to get it a bit finer but it was very fragile and I
: ended up breaking it off too. I ended up with very thin gaps of about
: 4" long that I tried to slide in some shavings. Still not perfect
: though.

Stationary sander, or a belt sander fixed to the workbench.

--S

Messages In This Thread

Strip: Cheater strips
mtkayak -- 2/9/2009, 4:14 pm
Re: Strip: Cheater strips
Kirt Lindeman -- 2/15/2009, 1:41 am
Re: Strip: Cheater strips
Etienne Muller -- 2/13/2009, 6:57 pm
Re: Strip: Cheater strips
Bill Hamm -- 2/14/2009, 1:33 am
Re: Strip: Cheater strips
Rob Macks / Laughing Loon CC&K -- 2/10/2009, 11:01 am
Re: Strip: Cheater strips
Scott Fitzgerrell -- 2/10/2009, 8:23 am
Re: Strip: Cheater strips
mtkayak -- 2/10/2009, 8:58 am
Re: Strip: Cheater strips
Kyle T -- 2/10/2009, 7:45 am
Re: Strip: Cheater strips
Bill Hamm -- 2/10/2009, 1:08 am
Re: Strip: Cheater strips
mike allen -- 2/9/2009, 4:26 pm