Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Material: cedar question
By:bob Kelim
Date: 2/6/2003, 6:14 pm
In Response To: Material: cedar question (Jeff The Tall)

: My wife and I are looking into buying some acreage near seattle. I won't tell
: you where, other than the fact that it's on one of the larger islands in
: Island County.

: While tromping around I found what looks to be a 10-12' WR cedar log lying on
: the ground, about 2' in diameter, and another that looks to be about 30'
: long and at least 2' in diameter that is suspended above the ground in
: places.

: I think that this area was logged in about 1996-97 So it is possible that
: these have been lying around since then. It is possible that these were
: left for some reason, or they may have been overlooked. If they were
: overlooked what is the chance that it is still useable? I've heard that
: cedar that was left at the bottom of a creek for 100 years, that has been
: dredged up and sold for premium prices. Most of the pine scree that was
: left would not even burn nicely, but these looked solid, with a touch of
: surface discoloration.

: BTW: if this goes through, I plan to be planting lots of white oak, yellow
: and red cedar (I am looking into getting some Port Orfert cedar) and other
: nice boat building woods. So if you are looking for some wood, contact me
: in about 100 years
In another life back when things ran properly I used to cut shake bolts. I'm not sure how long some of the wood had been down but we had to shovel several feet of duff off of some of the logs before we could start cutting. I re-shingled a roof on my first house in 1986, The house was built in 1905, this was the first time it had been re-roofed. Cedar lasts for nearly ever.
Bob

Messages In This Thread

Material: cedar question
Jeff The Tall -- 2/6/2003, 5:06 pm
It Lasts and Lasts and Lasts ...
grant -- 2/6/2003, 6:29 pm
Re: Material: cedar question
bob Kelim -- 2/6/2003, 6:14 pm
Re: Material: cedar question
srchr/gerald -- 2/6/2003, 5:52 pm