Date: 12/22/2002, 12:57 pm
: I just acquired a handmade wooden kayak, and am having great fun with it on
: flat water down here in Florida. Unfortunately, the combing is cracked and
: split, and I am not sure how to proceed with fixing it. I do have the one
: small piece that completely broke off of the combing.
: Thank you in advance for your help!
: Jeff
Hey Jeff,
From what I've seen on this BBS, there's nothing that can't be repaired or cut out and replaced on your yak. Is your boat S&G, stripper, or what, and have you ever used fiberglass and epoxy? If you could post a picture of the damage, it would be helpful. I'm sure someone will be glad to offer some advise on the repair. You've come to the right place for help! You should be getting some advice very soon.
I've only built one stripper and am trying to get started on the second one, a Guillemot L, so my experience is somewhat limited, but there's some VERY experienced people who frequent this board.
By the way, what part of Fl. are you located? I'm in Lake Butler.
Good luck on the repairs and Happy Yakin'.
Charles.
Messages In This Thread
- Seeking: Help with Combing Repair
Jeff -- 12/22/2002, 11:37 am- Re: Seeking: Help with Combing Repair
Myrl Tanton -- 12/23/2002, 12:43 pm- Re: Seeking: Help with Combing Repair
Charles Leach -- 12/22/2002, 12:57 pm - Re: Seeking: Help with Combing Repair
- Re: Seeking: Help with Combing Repair