Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: IT WORKS! *Pic*
By:Erich Eppert
Date: 11/2/2001, 12:07 pm
In Response To: Re: MDF vs OSB for stations (Erich Eppert)

Maybe this time. The form in front is the Cape Ann and in the back the Guillemot.
The Cape Ann is now being decked and the Guillemot is 3/4 planked on the hull. This shows the strongbacks being used instead of saw horses. This rig helped us straighten any deflection the box beam had. The hulls are as near to perfect as one can align them.

Messages In This Thread

MDF vs OSB for stations
Steve Mehder -- 11/2/2001, 8:44 am
Re: MDF vs OSB for stations
steve pollack -- 11/3/2001, 4:21 pm
Re: MDF vs OSB for stations
Erich Eppert -- 11/2/2001, 10:15 am
Re: IT WORKS! *Pic*
Erich Eppert -- 11/2/2001, 12:07 pm
Re: MDF vs OSB for stations *Pic*
Erich Eppert -- 11/2/2001, 11:36 am
Can't get the picture to come out. *Pic*
Erich Eppert -- 11/2/2001, 11:46 am
Re: Photo came out a little dark but still ok!! *NM*
Ben Staley -- 11/2/2001, 11:52 am
Re: MDF vs OSB - the Better of Two Evils!!
Rehd -- 11/2/2001, 9:44 am
Re: MDF vs OSB - the Better of Two Evils!!
Steve Mehder -- 11/2/2001, 11:19 am
voids in plywood forms won't affect stapling
Paul G. Jacobson -- 11/3/2001, 12:35 am
Re: MDF vs OSB - the Better of Two Evils!!
steve hartmann -- 11/2/2001, 4:52 pm
Re: MDF vs OSB - the Better of Two Evils!!
KenB -- 11/2/2001, 12:10 pm
Re: MDF vs OSB for stations
Bob -- 11/2/2001, 9:21 am
Re: MDF vs OSB for stations
robert schaum -- 11/2/2001, 9:03 am