Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Forgot to ADD
By:Andrew Sommer
Date: 12/19/2007, 6:40 pm
In Response To: Re: Forgot to ADD (george jung)

: Good idea! Just a thought.... but if you taped the syring at the 'action' end
: and had an extension to the plunger, you'd not waste that epoxy. YMMV

The waste comes from the inefficiency of the system. It take alot of pull to get the epoxy up into the remote end and you never get it all back out. The waste is more then worth the ability of getting the epoxy where it needs to go. A small bead along the joint in between the wires and your good. Then remove the wires and tape away.

Rolling the presaturated fiberglass tape out is a whole "Nutter" matter!

Andy

Messages In This Thread

S&G: Glueing process for Stitch and Glue
Quaziman -- 12/18/2007, 5:39 am
Re: S&G: Glueing process for Stitch and Glue
ROY -- 12/21/2007, 6:42 am
Here is how to extend your reach (one method) *LINK* *Pic*
Andrew Sommer -- 12/19/2007, 1:41 pm
Re: Here is how to extend your reach (one method)
William Cruz -- 12/21/2007, 10:20 am
Re: Here is how to extend your reach (one method)
Bill Hamm -- 12/21/2007, 2:23 pm
Re: Here is how to extend your reach (one method)
William Cruz -- 12/23/2007, 11:47 pm
Re: Here is how to extend your reach (one method)
Bill Hamm -- 12/24/2007, 1:45 am
Sheerstrakes
Dan Caouette (CSFW) -- 12/24/2007, 5:41 am
Re: Sheerstrakes
Bill Hamm -- 12/25/2007, 1:20 am
Forgot to ADD
Andrew Sommer -- 12/19/2007, 1:47 pm
Re: Forgot to ADD
george jung -- 12/19/2007, 6:29 pm
Re: Forgot to ADD
Andrew Sommer -- 12/19/2007, 6:40 pm
A MUCH better way *LINK* *Pic*
Dan Millsip -- 12/25/2007, 11:28 pm
Re: S&G: Glueing process for Stitch and Glue
Quaziman -- 12/18/2007, 8:14 pm
Re: S&G: Glueing process for Stitch and Glue
HenkA -- 12/21/2007, 1:17 pm
Re: S&G: Glueing process for Stitch and Glue *LINK*
TOM RAYMOND -- 12/19/2007, 2:00 pm
Re: S&G: Glueing process for Stitch and Glue *LINK*
Tony F -- 12/18/2007, 8:12 pm
Re: S&G: Glueing process for Stitch and Glue *LINK*
Tony F -- 12/18/2007, 8:19 pm
Re: S&G: Glueing process for Stitch and Glue *LINK*
Mike Savage -- 12/18/2007, 10:08 pm
Re: S&G: Glueing process for Stitch and Glue
Tony F -- 12/18/2007, 11:11 pm
Re: S&G: Glueing process for Stitch and Glue
fred Gasper -- 12/18/2007, 7:14 pm
Re: S&G: Glueing process for Stitch and Glue
HenkA -- 12/18/2007, 12:25 pm
Re: S&G: Glueing process for Stitch and Glue
Charlie -- 12/18/2007, 10:22 am
Re: S&G: Glueing process for Stitch and Glue
Dave -- 12/18/2007, 9:08 am