Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: Spray finishes
By:Mike Bielski
Date: 12/15/2007, 8:41 am
In Response To: Re: Strip: Spray finishes (Dan Caouette (CSFW))

: Should be a lovely boat. If you're the same Mike from the QUSA board you've
: built plenty of boats before. You're already a mad builder then. Welcome
: to the wood hardshell ranks.

: Dan

Yes, the same. Don't let the them know I've gone over to the dark side....

I originally wanted to build a hard boat first, but the materials for an entire SOF were roughly the same as the epoxy for a hard boat, and then I got side-tracked. My wife's out of grad school now, so I'm finally getting back to the wood-strip project.

Messages In This Thread

Strip: Spray finishes
Mike Bielski -- 12/14/2007, 2:27 pm
Re: Strip: Spray finishes
Paul G. Jacobson -- 12/16/2007, 5:20 pm
Re: Strip: Spray finishes *Pic*
Roger Turgeon -- 12/15/2007, 8:46 am
Re: Strip: Spray finishes------WebKitFormBoundary+
Mike Bielski------WebKitFormBoundary+XGdOpfdXLb1MY -- 12/15/2007, 7:12 pm
Re: Strip: Spray finishes *Pic*
Roger Turgeon -- 12/15/2007, 8:50 am
Re: Strip: Spray finishes *LINK*
Dan Caouette (CSFW) -- 12/14/2007, 3:18 pm
Re: Strip: Spray finishes
Mike Bielski -- 12/14/2007, 4:07 pm
Re: Strip: Spray finishes
Dan Caouette (CSFW) -- 12/15/2007, 7:16 am
Re: Strip: Spray finishes
Mike Bielski -- 12/15/2007, 8:41 am
Re: Strip: Spray finishes
Mike Savage -- 12/15/2007, 9:20 am
Re: Strip: Spray finishes
Mike Bielski -- 12/15/2007, 6:56 pm
Re: Strip: Spray finishes
Mike Savage -- 12/15/2007, 10:46 pm
Re: Strip: Spray finishes
John Monroe -- 12/18/2007, 6:03 am
Re: Strip: Spray finishes
Mike Savage -- 12/18/2007, 7:42 am
Re: Strip: Spray finishes
Mike Bielski -- 12/15/2007, 11:19 pm
Re: Strip: Spray finishes
Mike Savage -- 12/16/2007, 1:56 pm
Van Dam Wood Craft *LINK*
Mike Bielski -- 12/14/2007, 2:35 pm