Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: S&G: A few question about material selection
By:quaziman
Date: 12/11/2007, 7:02 am

: I have readily available dodgy quality 4mm plywood sheets (2440x1200mm) for
: around $20 australian a sheet to build a S&G guillemot. This plywood is
: completely random, i have no idea what grade it is or anything like that.
: It looks relatively knot free on the exposed surfaces which also happen to
: look quite ugly. My question is should i even consider using this stuff,
: it is around 3 times cheaper than high quality marine or exterior grade
: plywood of the same thickness. If anyone here is from australia, its
: bunnings plywood in 4mm.

: My 2nd queston, is 4mm plywood really thick enough? I have no doubt that for
: the general hull this should be more than adequate, but im curious how it
: will handle my entire body weight on one spot when i step one foot into it
: as i get into it off a jetty (i weigh about 98kg ~ 240lb?)

OH YES i should add, that i will be using this s&g kayak for fishing mostly, so if anyone has any tips to add about that it would be great (such as going for another design with more stability and room, etc)

Messages In This Thread

S&G: A few question about material selection
quaziman -- 12/11/2007, 5:13 am
Re: S&G: A few question about material selection
Charlie -- 12/14/2007, 12:19 pm
Re: S&G: A few question about material selection
Bill Hamm -- 12/15/2007, 10:00 am
Re: S&G: A few question about material selection
HenkA -- 12/13/2007, 10:22 pm
Re: S&G: A few question about material selection
Bill Hamm -- 12/12/2007, 1:33 am
gotta agree with Bill
TOM RAYMOND -- 12/12/2007, 11:32 am
Re: S&G: A few question about material selection
Daren -- 12/11/2007, 7:51 pm
Re: S&G: A few question about material selection
Acors -- 12/11/2007, 3:42 pm
Re: S&G: A few question about material selection *LINK*
Tony F -- 12/11/2007, 8:12 pm
Re: S&G: A few question about material selection
Paul G. Jacobson -- 12/11/2007, 2:37 pm
Re: S&G: A few question about material selection
quaziman -- 12/11/2007, 7:02 am