Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: redfish king questions
By:Bob Kayes
Date: 11/19/2007, 6:51 pm
In Response To: Strip: redfish king questions (stephen Dobert)

Stephen,
Check that you have measured correctly and marked on the strongback the spacing for the riser blocks. Then check that the blocks are on the correct side of the measured line. Then be sure that you have placed the risers on the correct side of the blocks. If Joe hasn't changed his instructions then it's STEP #6 that you should look at.
Bob

Messages In This Thread

Strip: redfish king questions
stephen Dobert -- 11/19/2007, 4:40 pm
Re: Strip: redfish king questions
Bob Cross -- 11/20/2007, 1:41 pm
Re: Strip: redfish king questions
stephen Dobert -- 11/25/2007, 11:57 am
Re: Strip: redfish king questions *Pic*
Christian Grejsen -- 11/19/2007, 10:22 pm
Re: Strip: redfish king questions
Christian Grejsen -- 11/19/2007, 10:31 pm
Re: Strip: redfish king questions *LINK*
kelly t -- 11/19/2007, 6:54 pm
Re: Strip: redfish king questions
Bob Kayes -- 11/19/2007, 6:51 pm
Re: Strip: redfish king questions
Ted Henry -- 11/19/2007, 5:43 pm
Re: Strip: redfish king questions *LINK*
Bob Deutsch -- 11/19/2007, 4:45 pm