Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Strip: General questions
By:Scott Guenther
Date: 12/2/2004, 6:17 pm

Hello,

I'm ready to attach my forms to the strongback and get started. A few questions:
1) I'm thinking to mark the centerline on the strongback to use as the center reference, and then use a laser alignment tool to project a horizontal line at the waterline as I install each form. Has anyone tried this? What results?
2) My construction space is not heated and I live in central Ohio. What are the practical temperature limits for Elmer's wood glue? (heating the space is way too expensive)

Thanks for the input

Scott

Messages In This Thread

Strip: General questions
Scott Guenther -- 12/2/2004, 6:17 pm
Re: Strip: General questions
Gennie -- 12/5/2004, 3:25 am
Re: Strip: General questions
John Monroe -- 12/4/2004, 4:30 am
Ohio? Great State!
Bill Cruz -- 12/3/2004, 2:39 pm
Re: Ohio? Great State!
Scott Guenther -- 12/3/2004, 4:41 pm
Re: Ohio? Great State!
Bill Cruz -- 12/6/2004, 3:40 pm
Re: Ohio? Great State! *Pic*
Mark Grieve -- 12/4/2004, 1:03 am
Nice strip pattern going on.... *NM*
Bill Cruz -- 12/6/2004, 3:25 pm
Re: Strip: General questions
Paul G. Jacobson -- 12/3/2004, 12:49 pm
Re: Strip: General questions
Bob May -- 12/3/2004, 12:24 pm
Re: Strip: General questions
john walker -- 12/3/2004, 11:58 am
Re: Strip: General questions
Mike Grace -- 12/7/2004, 7:00 pm
Re: Heating
Mike Scarborough -- 12/2/2004, 9:14 pm
Re: Strip: General questions
PatrickC -- 12/2/2004, 7:11 pm
Re: Strip: General questions *LINK*
gerald -- 12/2/2004, 7:04 pm
Re: Strip: General questions
Thomas Duncan -- 12/2/2004, 7:02 pm