Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Recycling Painted Cedar
By:Rehd
Date: 9/12/2001, 10:39 am
In Response To: Re: Recycling Painted Cedar (Brian Wegener)

: Thanks Rehd. It is not beveled. These are trim pieces, 3/4"-1"
: thick. I know a contractor that does vinyl siding. He was taking the cedar
: he pulled off of houses to the composting yard to be ground up. Now he
: calls me to pick it up. He removes the nails even. He's happy to save the
: disposal fees.

: Brian

Just figure out which way to cut so you get the verticle grain on the wide face of your strips and you're all set. If you have to get them out of the 3/4" side and the ends are covered with paint, then run them down to 11/16" or 5/8". It won't matter, except that you'll have to use an extra strip or two on the go-around, but the narrower strips will be easier to bend. Good find on the free wood.

Rehd

Messages In This Thread

Recycling Painted Cedar
Brian Wegener -- 9/12/2001, 12:25 am
Re: Recycling Painted Cedar
Tony -- 9/12/2001, 5:29 pm
Re: Recycling Painted Cedar
Rehd -- 9/12/2001, 12:45 am
Re: Recycling Painted Cedar
Brian Wegener -- 9/12/2001, 9:45 am
rip them as is
Paul G. Jacobson -- 9/12/2001, 6:36 pm
Re: Recycling Painted Cedar
Jim -- 9/12/2001, 11:43 am
Re: Recycling Painted Cedar
Rehd -- 9/12/2001, 10:39 am